Force10 Networks C-Series installation instructions LED Description, Installation Notes

C-Series FlexMedia Card: 36 Ports 10/100/1000 Base-T Ethernet (PoE and non-PoE), 8 Ports 1G, 2 Ports 10G

Feature Highlights and Installation Instructions

Feature Highlights

•There are two versions of the FlexMedia card, differing only in Power over Ethernet (PoE) support:

•Catalog # LC-CB-10G-1G-36V(card type E36VB): PoE support to 15.4 Watts/port on 10/100/1000 ports

•Catalog # LC-CB-10G-1G-36T (card type E36TB): non-PoE

•36 ports with RJ-45 connectors support auto-negotiation or 10/100/1000 Base-T speed, full and half duplex.

•8 ports use approved 1G Small-form Factor Pluggable (SFP) optical transceivers.

•2 ports use approved 10G Small-form Factor Pluggable (SFP+) optical transceivers.

•SFP+ ports support SR and LR media modules (only Force10-specific modules are recognized by the card.). Note: FTOS 7.7.1.0 does not allow non-qualified SFP+ modules, which can cause board damage.

•The CB series line cards support the following CAM configurations:

•12K Layer 3 IP forward information base (FIB)

•16K Layer 2 FIB

•768 Layer 2 access control list (ACL) entries

•768 Layer 3 access control list (ACL) entries

•Support for online insertion and removal (OIR) of line card.

•Support for ingress Layer 2 and Layer 3 ACL processing across all ports.

Installation Notes:

• The chassis into which this line card is installed must be running FTOS version 7.7.1.0 or later and boot code 2.6.0.2 or later.

• Only the non-PoE version of the card works in a DC-powered chassis.

LED Description

Port Type	Link Status (Left Side LED)	Speed (Right Side LED)
10/100/1000Base-T	Green blinking: Link detected/activity	Amber solid: 1G speed
	Green solid: Link detected/no activity	Amber blinking: 100M speed
	Off: No link/card offline	Off: 10M speed
1000Base-X	Green: Operational/no activity	Green: On
	Green blinking: activity
	Off: No link/card offline
100Base-FX	Green: Operational/no activity	Yellow: On
	Green blinking: activity
	Off: No link/card offline
Card Status LED	Green: operational
	Green blinking: booting/ diagnostics
	Red: card problem
	Unlit: in standby mode or power is off

101-00310-02