![](/images/new-backgrounds/1163888/16388823x1.webp)
34. Swap ( ): Switches between the main picture and sub picture in PIP mode
Rewind jump function at HDD play. (Application as running change),
35.Move ( ): Moves the location of the sub picture in PIP mode. Forwarder jump function at HDD play. (Application as running change),
36.PIP CH ( /
): Changes the channel in the sub picture window in PIP mode. Slow function at HDD play.
(Application as running change)
37.TimeShift ( ): Start Timeshift and pause the picture.
38.REC ( ): Start recording
39.FR ( ): Fast rewind. Toggle speeds. (x1, x2, x4, x8)
40.PLAY ( ): Start playback
41.FF ( ): Fast forward. Toggle speeds. (x2, x4, x8)
42.STOP ( ): Stop playback or recording.
How to program the Universal Remote Control
1.Manual Setting:
1.Turn on the device (TV/VCR/DVD).
2.Press OK button and the device button (TV/VCR/DVD) simultaneously for more than 2 seconds.
3.Press the 3 digit code for your device brand.
4.If there is more than one code for your brand, please check all possible codes until the device turns off.
5.If the device turns off, it should be programmed.
6.Press the device button again to turn on the device.
7.Check the Universal Remote Control to ensure that it is operating the device.
2.Auto Setting:
1.Turn on the device (TV/VCR/DVD).
2.Press the OK button and the device button (TV/VCR/DVD) for more than 2 second
3.Press CH + button and keep it pressed until the device is turned off.
4.If the device is turned off, please press the device button.
5.Check the Universal Remote Control in operation and check if all other buttons are working.
Note. Please refer to device code as attachment
13