Fortec Innovation manual Advanced Scan Function, Fec

9.3.3Advanced Scan Function

•To access the Advanced Scan menu from the Antenna Setup, press the WHITE button on the remote control.

•In this menu, you can scan a specific transponder from the list.

•You can scan a new transponder as well by adding its frequency, symbol rate, and polarity.

•Select the satellite by using thee/f buttons. Choose from the list and confirm the selection with OK.

•Select the TP by using e/fbuttons. Choose from the list and confirm the selection with OK.

•If you need to search for a TP which is not in the data, input a proper frequency using NUMERIC buttons.

o Symbol Rate: Input a proper symbol rate if needed using the Numeric buttons.

o DVB Standard: Select the DVB Standard of the TP (DVB-S or DVB-S2) using e/fbuttons.

o Please refer to following table for selection for Modulation, FEC, Pilot in DVB-S or DVB-S2.

Parameter	DVB-S	DVB-S2
Modulation	Disabled	QPSK	8PSK
			2/3,3/4,3/5,
FEC	Auto,1/2,2/3,	1/2,2/3,3/4,3/5,4/5,
	3/4,5/6,7/8	5/6,8/9,9/10	5/6,8/9,9/10
Pilot	Disabled	Auto, off, on	Auto, off, on

•If you know the PID channel information you can scan for a specific channel.

ƒEnter the PID of the channel you want to search.

ƒSet the channel's Video PID using Numeric buttons.

ƒSet the channel's Audio PID using Numeric buttons.

ƒSet the channel's PCR PID using Numeric buttons.

ƒPress the RED button to save.

ƒPress the YELLOW button to start the scan.

ƒPress the MENU button to return to viewing mode or Back( ) button to return to previous menu.

25