Foster 7321 240, 7322 240 user manual Pan detection, Residual heat indication, Booster function

∙Start-up/ switch off the heating zone :

Action	Control panel	Display
Increase power	Press key [ + ]	[ 4	] to [ 9 ]
Decrease power	Press key [ - ]	[ 9	] to [ 1 ]
Stop	Press simultaneous[ + ] and [ - ]	[ 0	] or [ H ]
	or press [ - ]	[ 0	] or [ H ]

If no setting are made in 20 seconds the hob return in waiting position.

Pan detection

The pan detection ensures a perfect safety.

The induction doesn’t work:

∙If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case it is impossible to increase the power and the display shows [ U ]. This symbol disappears when a pan is put on the heating zone.

∙If the pan is removed from the heating zone the operation is stopped. The display shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking continues with the power level chosen before.

Residual heat indication

After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display. The symbol [ H ] disappears when the heating zone may be touched without danger.

As far as the residual heat indicator is on light, don’t touch the heating zone and don’t put any heat sensitive object on them. There are risks of burn and fire.

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.

If this function is activated the heating zones works during 10 minutes with an ultra high power. The booster is foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.

∙ Start up / Stop the booster function :

Action

Increase power

Start up the booster

Stop the booster

∙Power management :

Control panel	Display
Press key [ + ] or [ - ]	[ 1	] to [ 9 ]
Press key [ + ]	[ P ] during 10 min.
Press key [ - ]	[ 9	]

The whole cooking hob is equipped by a maximum of power. When the booster function isactivated, and not to exceed the maximum power, the electronic system orders to reduce automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds and then shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).

Heating zone selected	The other heating zone: (example: power level 9)
[ P ] is displayed	[ 9 ] goes to [ 7 ] or [ 8 ] depending the type of zone

20