Foster 7322 240, 7321 240 user manual STARTING-UP and Appliance Management

Display

Display	Designation	Function
0	Zero	The heating zone is activated
1…9	Power level	Selection of the cooking level
U	Pan Detection	No pan or inadequate pan
E	Error message	Electronic failure
H	Residual heat	The heating zone is hot
P	Booster	The boosted power is activated

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the calories brought out by the electronic system reach a certain level. The ventilation starts his high speed when the hob is intensively used. The cooling fan reduces his speed and stops automatically when the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which risks causing blue-tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is engaged, it produces a variable electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the pan. The result is a heating-up of the pan located on the heating zone.

Of course the pan has to be adapted:

∙All ferromagnetic pans are recommended (please verify it thanks a little magnet): cast iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms…

∙Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware…

The induction heating zone adapts automatically the size of the pan. With a too small diameter the pan doesn’t work. This diameter is varying in function of the heating zone diameter.

If the pan is not adapted to the induction hob the display will show [ U ].

Starting-up

You must first start-up the hob, then the heating zone :

∙Start-up/ switch off the hob :

Action Control panel Display

To start	Press key [ 0/I ]
To stop	Press key [ 0/I ]

2 x [ 0 ] nothing or [ H ]

19