Fostex D2424LVMKII manual Setup of the Internal Clock, Press the Setup key while in the stop mode

Model D2424LVmkII Quick Operation Guide

Setup of the Internal Clock

This recorder contains an internal clock function.

Upon finishing format of the current drive, set internal clock to the present time by procedure explained below. Procedures below is explained on the assumption that current drive has been formatted, the program head (ABS 0) is displayed and this recorder is on standby.

<Note>

Be sure the internal clock is setup to the correct year, month, day and present time.

The year, month, day and time are important data necessary for executing the "Multiple Undo Function" ex- plained in the Reference Manual. For details on multiple undo function, refer to the Reference Manual.

1.Press the [SETUP] key while in the stop mode.

The recorder will enter the SETUP mode and “Signature Set?” menu will be displayed.

Flashing

SETUP

OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

2.Rotate Jog dial to display the “Date & Time Set?” (“?” flashes) menu and press the [EXECUTE/YES] key.

The recorder will change to display of hour, minute, second, day and month in real time setup at shipping the recorder from the plant.

Example is January 8, 8 hour, 28 minutes, 54 seconds).

Flashing

SETUP

OL			OL	BIT	24
0	0
3		3			FS
6			6
9		9			kHz
12		12			CLOCK
18		18
24		24			INT
30		30
42	42
∞			∞

4.Move edit point with the Shuttle dial and

input the number with the Jog dial.

When the Shuttle dial is rotated CW, the edit point will move in order of "day," "month," "year," "hour," "minute," but in reverse order when rotated CCW. Numbers, etc. shown below can be entered at each edit point.

Hour	:00 ~ 23
Minute	:00 ~ 59
Day	:01 ~ 31
Month	:January ~ December
Year	:00 ~ 99

<Note>

The "second" figures will start from 00 at the in- stant the following is executed (Pressing the [EX- ECUTE/YES] key). Press the [EXECUTE/YES] key in reference to the time announcement.

5.Press the [EXECUTE/YES] key.

The recorder will be set to the time/month, day that was input and continue to function as the internal clock.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

SETUP

H M S

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

6.Exit from the SETUP mode by pressing the [EXIT/ NO] key or [STOP] button twice.

The recorder will change to the time base display prior to entering the SETUP mode.

3.Press the [EXECUTE/YES] key.

The date section will flash and enter in the editing mode. The time display will change to indicating hour/minute.

Flashing

SETUP
H	M

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

12