Functions of the Single Mode
TYPE SW
Use this to choose the Effect Type on the Single Mode. There are 11 types available.
PARAM. 1 knob
This control knob adjusts the Effect Parameter 1. The center position is the default setting. If you turn it to the left, the parameter will decrease. Similarly, if you turn it to the right, the parameter will increase.
These knobs have no functions in the S i n g l e M o d e operation.
PARAM. 2 knob
This control knob adjusts the Effect Parameter 2. The center position is the default setting. If you turn it to the left, the parameter will decrease. Similarly, if you turn it to the right, the parameter will increase.
EFFECT 1 |
|
|
|
|
|
|
|
|
|
|
|
| EFFECT 2 | |
TYPE |
|
| VARIATION | ADJUST | MIX |
|
|
| TYPE |
| VARIATION | ADJUST |
| MIX |
|
|
|
| PARAM.1 |
|
|
|
|
|
|
| PARAM.2 | PARAM.3 | |
DLY+REV |
|
| 6 | DRY+EFF |
|
|
| DLY+REV |
| 6 |
| DRY+EFF | ||
VOCAL | DELAY | 5 | 7 |
|
|
|
| VOCAL | DELAY | 5 | 7 |
|
|
|
PLATE | MISC | 4 | 8 |
|
|
|
| PLATE | MISC | 4 | 8 |
|
|
|
ROOM | CHO | 3 | 9 |
|
| MODE | ROOM | CHO | 3 | 9 |
|
|
| |
S.HALL | PITCH | 2 | 10 |
|
| SINGLE | DUAL | S.HALL | PITCH | 2 | 10 |
|
|
|
|
|
|
|
|
|
| ||||||||
L.HALL | FLANGE | 1 | 11 | DRY | EFF |
|
| L.HALL | FLANGE | 1 | 11 |
| DRY | EFF |
|
|
|
|
|
|
|
|
|
|
|
|
| _ | + |
|
|
| PEAK |
|
|
|
|
|
|
| PEAK |
|
| POWER |
POWER LED
This illuminates when the Power is ON.Also, this will blink when the Effect Mute is set to ON via the Foot SW.
VARIATION SW
Use this to choose the Variation of the Effect Type. There are 11 variations available on each Effect Type.
PEAK LED (L channel)
This will illuminate when the Input signal reaches 6dB below the distortion level.
MIX knob
Use this to adjust the mixing balance of the Dry sound and Effect sound for the signal from the OUTPUT L, R jack sockets; on the Left Max. : DRY 100%, EFF 0% in the Center : DRY 50%, EFF 50% on the Right Max. : DRY 0%, EFF 100%
PEAK LED (R channel)
This will illuminate when the Input signal reaches 6dB below the distortion level.
MODE SW
Use this to choose the operation mode either the Dual Mode or Single Mode.
PARAM. 3 knob
This control knob adjusts the Effect Parameter 3. The center position is the default setting. If you turn it to the left, the parameter will decrease. Similarly, if you turn it to the right, the parameter will increase.
Foot SW socket
Connect a Foot SW, such as the Fostex Model 8051, to control the Effect Mute ON/ OFF.
INPUT L (MONO), R jack sockets
These are the input terminals used to connect the two channel audio source for the Effect. If you want to feed the same audio signal to both L channel and R channel at once, only use the INPUT L (MONO) socket without connecting anything into the INPUT R jack socket.
| EFF MUTE | R | L (MONO) | R | L (MONO) | 2 | DUAL MODE | 1 (1&2) |
|
9V |
|
|
|
|
| R | SINGLE MODE | L (MONO) |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
ONLY |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MIN | MAX | MIN | MAX |
DC IN | FOOT SW |
| OUTPUT 2 |
| OUTPUT 1 |
| INPUT |
|
|
DC INLET socket
To connect the standard accessory AC adaptor to power up the
These jack sockets |
|
| INPUT LEVEL knobs |
have no functions in |
|
| These volume knobs control the input level of |
the Single Mode |
|
| INPUT 1 and INPUT 2. |
operation. |
|
|
|
|
|
|
|
| OUTPUT L (MONO), R jack sockets | ||
| These are the output terminals used to send | ||
| a processed audio signal via the Effect in | ||
| stereo (L, R). If you want to obtain a mono | ||
| audio signal (L+R), use only the OUTPUT | ||
| L (MONO) jack socket. | ||
15
