Setting Midi sync output signal Sync Out ? menu, 103

Changing the initial setting (SETUP mode)

Setting MIDI sync output signal (“Sync Out ?” menu)

The “Setting MIDI sync output signal” menu enables you to select the type of MIDI sync signals output from the MIDI OUT connector on the rear panel of the FD-8 to an external MIDI device.

The options are MIDI clock & Song Position Pointer, or MTC (MIDI time code). Select an appropriate option depending on the type of signal supported by the connected MIDI device.

If you select MIDI clock & Song Position Pointer, first you need to set the time signatures and tempo as described previously. If you select MTC, you first need to set the MTC frame rate, the MTC offset time, and the MTC offset mode as described later.

•Initial setting: [cLK] (clock & Song Position Pointer)

•Option: [cLK] (clock & Song Position Pointer), [Mtc] (MIDI time code), [oFF] (no output)

*You can set the parameters for each Program individually.

*The settings can be saved and loaded as part of the song data.

*The settings are maintained after you turn off the power to the unit.

Setting MIDI sync signal

1.While the FD-8 is stopped, press the SETUP key to enter SETUP mode.

2.Rotate the JOG dial to select [Sync Out ?] ([?]

flashes.), then press the EXECUTE/YES key.

The currently-selected MIDI sync signal type appears on the display.

Press the EXECUTE/YES key to turn off the flashing [?] indication. The MIDI sync signal type indication flashes, and the indicator flashes indicating the SYNC OUT setting. The initial setting is [cLk] as shown below.

	SETUP	44.1kHz
	SETUP

SYNC OUT		DRIVE
CLK			SCSI
AUTO		A.PUNCH

Each option appears on the display as follows.

When [cLK] is selected:	SYNC OUT
When [cLK] is selected:	CLK
	CLK

When [Mtc] is selected:	SYNC OUT
When [Mtc] is selected:		MTC
		MTC

When [oFF] is selected:	SYNC OUT
When [oFF] is selected:

To cancel the setting operation, or to restore a setting obtained prior to the EXECUTE/YES key press, press the STOP button or the EXIT/NO key. Each time you press one of these keys, the FD-8 returns to the previous hierarchy level of the menu, and finally exits SETUP mode and displays the previous Time Base.

44.1kHz

SETUP

SYNC OUT

CLK

AUTO

DRIVE

SCSI

A.PUNCH

3. Turn the JOG dial to select the desired MIDI sync signal.

Setting this parameter to [cLK] (initial setting) will select MIDI clock & Song Position Pointer.

Setting the parameter to [Mtc] will select MIDI time code. With the [oFF] setting, no MIDI sync signal will be output.

4. Press the EXECUTE/YES key.

The selected MIDI sync signal type is stored, and the FD- 8 returns to the display with the flashing [?] indicator as shown in step 2.

103 FD-8 specifications

The Fostex FD-8 is a revolutionary digital multitracker that has garnered significant attention since its release. Designed for musicians and audio professionals, the FD-8 offers a compelling combination of functionality, simplicity, and affordability, making it an ideal choice for both studio recordings and live performances.

One of the key features of the Fostex FD-8 is its 8-track simultaneous recording capability. This allows users to record multiple instruments or vocal parts at once, enabling more complex arrangements without the hassle of overdubbing. With a built-in 20-bit A/D converter, the FD-8 captures high-quality audio, ensuring that every nuance of a performance is faithfully reproduced.

In addition to its recording capabilities, the FD-8 boasts a range of editing features that make it easier to fine-tune performances. The onboard digital effects processor includes reverb, delay, and EQ settings, which can be applied in real-time, offering users a versatile toolkit for sound manipulation. This means that the FD-8 not only serves as a recording device but also as a powerful mixing console.

The FD-8 employs a user-friendly interface, with a large backlit LCD display that provides clear feedback on track levels and settings. Navigating through the device’s extensive features is simplified by an intuitive layout, making it accessible for both novice and experienced users. The inclusion of USB connectivity allows for easy data transfer, enabling users to back up their projects or move recordings to a computer for further editing.

Another noteworthy characteristic of the Fostex FD-8 is its compatibility with various media formats. It supports standard audio files, making it convenient for musicians to work with different file types. The ability to save work on standard CD-Rs or a removable storage device adds to the operational flexibility.

The robust build of the FD-8 is designed to endure the rigors of touring and live performances. Its compact size allows for easy transport, while the durable housing protects against wear and tear.

In essence, the Fostex FD-8 stands out as a remarkable digital multitracker that provides users with essential recording and editing features packed into a portable, user-friendly package. Its combination of quality, flexibility, and ease of use has made it a popular choice among audio professionals and hobbyists alike, securing its place as a staple in modern music production.

Fostex FD-8 Setting Midi sync output signal Sync Out ? menu, Setting Midi sync signal, 103

Models: FD-8

Setting MIDI sync output signal (“Sync Out ?” menu)

Setting MIDI sync signal

Each option appears on the display as follows.

3. Turn the JOG dial to select the desired MIDI sync signal.

4. Press the EXECUTE/YES key.

103

FD-8 specifications