Manual Punch In/Out take, Cancelling Rehearsal mode

Punch In/Out Recording

The FD-8 operates as follows. You will hear your performance between the Punch In/Out points. Otherwise, you will hear the previously-recorded guitar.

Playback	Punch In point	Punch Out point	Playback
start point	(Rehearsal In)	(Rehearsal Out)	end point

Track 8
Track 7
Track 6
Track 5
Track 4
Track 3	This part is changed.
Track 2
Track 1
All tracks are in playback	Only track 3 in input	All tracks are in playback
monitoring mode.	monitoring.	monitoring mode.
	The sound is not recorded at
	this time.
	The RECORD LED flashes.

Press the foot switch at the	Press the foot switch at the
Punch In point.	Punch Out point.

6.When you finish rehearsing, press the STOP button. If you are still unsatisfied, repeat steps 3-5.

Cancelling Rehearsal mode

1. While holding down the STOP button, press the foot switch.

[Rehsl Off] appears for a second, the flashing [RHSL] indicator in the A. PUNCH display area disappears, and Rehearsal mode is cancelled.

<Hint>

To rehearse repeatedly, set the AUTO RTN START point slightly before the Punch In point, and the AUTO RTN END point slightly before the Punch Out point.

This will help you concentrate on your performance or check the recording level easily (especially since Manual Punch In/Out involves operating the foot switch operation as well as the FD-8). (See <Hint- 2> in the “Rehearsing Auto Punch In/Out recording” for more information.)

Manual Punch In/Out take

You can proceed to record if you are satisfied with the recording level, foot switch timing, and rehearsal.

Note: You cannot record a second take during the Manual Punch In/Out operation without stopping the FD-8. That is, the FD-8 will continue playing after you finish recording a take, but you cannot record another take by pressing the foot switch.

1.Confirm that Rehearsal mode is cancelled, and start playing the FD-8 from a point slightly before the desired Punch In point.

2.Play the guitar, accompanying the playback of tracks 1 to 8.

3.Press the foot switch at the desired Punch In point. Press the foot switch again at the desired Punch

Out point.

The FD-8 will operate as follows. The FD-8 enters recording mode at the Punch In point, and cancels recording mode at the Punch Out point.

4.Press the STOP button.

5.Play track 3 and check the result of Punch In/Out.

Playback	Punch In point	Punch Out point	Playback
start point	(Take In)	(Take Out)	end point

Track 8
Track 7
Track 6
Track 5
Track 4
Track 3	This part is changed.
Track 2
Track 1
All tracks are in playback	Only track 3 in input	All tracks are in playback
monitoring mode.	monitoring, and data will be	monitoring mode.
	recorded.
	The RECORD LED lights up
	in this area.

Press the foot switch at the	Press the foot switch at the
Punch In point.	Punch Out point.

At “Take” of punch out, the punch-in recording track will not immediately enter the repro monitor mode from the input monitor mode enter the repro monitor mode about two seconds after mute playback. This is a functional feature of FD-8 and not a malfunction.

FD-8 specifications

The Fostex FD-8 is a revolutionary digital multitracker that has garnered significant attention since its release. Designed for musicians and audio professionals, the FD-8 offers a compelling combination of functionality, simplicity, and affordability, making it an ideal choice for both studio recordings and live performances.

One of the key features of the Fostex FD-8 is its 8-track simultaneous recording capability. This allows users to record multiple instruments or vocal parts at once, enabling more complex arrangements without the hassle of overdubbing. With a built-in 20-bit A/D converter, the FD-8 captures high-quality audio, ensuring that every nuance of a performance is faithfully reproduced.

In addition to its recording capabilities, the FD-8 boasts a range of editing features that make it easier to fine-tune performances. The onboard digital effects processor includes reverb, delay, and EQ settings, which can be applied in real-time, offering users a versatile toolkit for sound manipulation. This means that the FD-8 not only serves as a recording device but also as a powerful mixing console.

The FD-8 employs a user-friendly interface, with a large backlit LCD display that provides clear feedback on track levels and settings. Navigating through the device’s extensive features is simplified by an intuitive layout, making it accessible for both novice and experienced users. The inclusion of USB connectivity allows for easy data transfer, enabling users to back up their projects or move recordings to a computer for further editing.

Another noteworthy characteristic of the Fostex FD-8 is its compatibility with various media formats. It supports standard audio files, making it convenient for musicians to work with different file types. The ability to save work on standard CD-Rs or a removable storage device adds to the operational flexibility.

The robust build of the FD-8 is designed to endure the rigors of touring and live performances. Its compact size allows for easy transport, while the durable housing protects against wear and tear.

In essence, the Fostex FD-8 stands out as a remarkable digital multitracker that provides users with essential recording and editing features packed into a portable, user-friendly package. Its combination of quality, flexibility, and ease of use has made it a popular choice among audio professionals and hobbyists alike, securing its place as a staple in modern music production.

Fostex FD-8 owner manual Manual Punch In/Out take, Cancelling Rehearsal mode, Out point

Models: FD-8