Fostex VF80EX All, Select the desired One or Select, When selecting One or Select

Save/Load of Song data (VF80EX)

<Warning message>

The warning message for copyright shown on the screen is as follows.

Warning!

You are responsible for use of this digital de- vice. Be sure to abide by the copyright condi- tions of the source material.

Press “Enter/Yes” key if you agree with the above.

<Hint>

The warning message above also appears when setting the “Digital In setting” menu to “On”.

See “Setup mode” on page 130 for details.

<Note>

If you do not agree with the warning message con- tents, press the [EXIT/NO] key to quit loading. The display briefly shows “Set Disable” and “Can’t Loading” , then returns to the mode select screen. If you agree with the warning message contents, go to the next step to continue the operation.

6If you agree to the message contents, press the [EN- TER/YES] key.

The display changes to show the screen for selecting the load type, on which “One” flashes.

You can select a desired load type from among the following.

	You can select one or more tracks to be loaded.
One	Each selected track is individually loaded to a new
	program automatically created on the current drive.
	You can select one or more tarcks to be loaded. All
Select	the selected track are loaded to a new program
	automatically created on the current drive.
All	All the tracks on an audio CD are loaded to a new
	program automatically created on the current drive.

*“A new program automatically created on the current drive” has the program number one higher than the current highest program number.

7Select the desired “One” or “Select”.

Depending on the selected load type, the display shows as below.

• When selecting “One” or “Select”:

The left column shows the track numbers (01, 02...) of the audio CD, while “NON” in the sewcond column shows no program is selected.

“**” is shown when more than one track is recorded on the audio CD. It is not shown when only one track is recorded on the audio CD.

To select desired tracks to be loaded, go to step 8.

• When selecting “All”:

All tracks on the audio CD are selected to be loaded, and the screen as shown below appears. In this screen example, the destination program newly created on the current drive is “P05”. Each track time is also shown.

When selecting “All”, you can start loading tracks to the current drive by pressing the [ENTER/YES] key while holding down the [RECORD] key.

You can delete an unnecessary track if you want. See <Hint> below about how to do it.

<Hint>

Before executing “All” track loading, you can de- lete ahn unnecessary track by the following proce- dure.

1)While the display shows the screen as above, use the [JOG] dial (or the [CURSOR] keys) to highlight the desired track and press the [ENTER/YES] key.

The destination program number of the selected track starts flashing.

2)Use the [JOG] dial (or the [CURSOR] keys) to select “NON” and press the [ENTER/YES] key.

A track whose destination program number is set to “NON” is not loaded.

8Use the [JOG] dial (or the [CURSOR] keys) to select (highlight) a desired track to be loaded and press the

[ENTER/YES] key.

The load destination program number of the selected track is shown as a flashing display, as well as the track time. In the screen example below, track 1 (01) is selected. The total time is also shown above the track list. (The total time is summed up each time you se- lect another track.)

Un this condition, you can choose the option between “Pxx” (program number) and “NON” using the [JOG] dial (or the [CURSOR] keys). To cancel the track selec- tion, choose “NON” and press the [ENTER/YES] key. To set the track to be loaded, go to the next step.

130