Fostex VF80EX owner manual Deleting a scene, Fader adjust

Mixer Functions (VF80EX)

2Use the [JOG] dial to select the desired scene number to be recalled.

3Press the [SETUP/F1] key while holding down the [SHIFT] key.

The selected scene is recalled and the display changes to the Normal display.

Deleting a scene

You can delete an unnecessary Scene or Temporary memory by using the following procedure.

<Notes>

•You cannot delete the memory in scene number 00. If you select scene number 00 and try to delete the memory, "DELETE" does not appear on the display.

•You cannot undo deleting a scene.

Be sure not to select a wrong scene number to be deleted.

Fader adjust

After recalling a scene, the recalled fader level usu- ally does not match the current physical fader posi- tion, you can move the physical faders to match the current fader positions of the scene.

The following description is assumed that "Fader re- call setting" of the setup mode is set to "Trk & Mst."

1Press the [SCENE/FADER] key while holding down the [SHIFT] key.

The display shows the fader setting screen.

The fader icon changes according to the relation be- tween the physical fader position and recalled fader position, as show below.

1

2

3

Press the [SCENE] key.

The display shows the scene number/title list.

Select a memory to be deleted using the [JOG] dial.

Press the [UNDO/REDO/F3] key while holding down the [SHIFT] key.

The message asking for confirmation to delete the scene appears and "Sure?" flashes.

To cancel to delete the mark, press the [EXIT/NO] key now.

•The current physical fader po- sition is lower than the recalled position.

•The current physical fader po-	•The current physical fader po-
sition matches the recalled po-	sition is higher than the recalled
sition.	position.

4

2	Move a physical fader manually to match the recalled
	(scene memory) position.
Flashing	After adjusting all the fader positions, press the [EXIT/
3
	NO] key.

	<Note>
Press the [ENTER/YES] key while holding down the	If you recall a scene when "Fader recall setting" of the
[RECORD] key.	setup mode is set to "OFF", the current physical fader
	positions are valid.
The selected memory is deleted and the scene name

changes to "[Un-defined]", showing that no memory is stored.

5

Press the [EXIT/NO] key.

The display returns to the Normal screen.

53