Fostex VF80EX owner manual Editing Marks, Viewing the mark list, Editing a mark position

Recorder Functions (VF80EX)

Editing Marks

This section describes how to edit marks, assuming that more than one mark is already stored in realtime according to the operations described in "Basic Recording and Playback".

Viewing the mark list

You can view the marks stored.

1While the recorder is stopped, press the [SCENE SEQ./ MAP] key while holding down the [SHIFT] key.

The mark positions are shown by time or bar/beat/clock values depending on the time base (In the following screen example, the time base is set to "Bar/Beat/Clk").

2Use the [JOG] dial or [CURSOR / ] keys to scroll the marks stored.

In the Mark map screen, you can not only view all the marks but also perform various operations (such as editing a mark position, entering a mark title, locating a mark, deleting a mark and adding a mark) described later.

Editing a mark position

You can edit the current position of a mark in the mark map.

1While the recorder is stopped, press the [SCENE SEQ./ MAP] key while holding down the [SHIFT] key.

The Mark map screen appears.

2Use the [JOG] dial or [CURSOR / ] keys to highlight the desired mark, and then press the [TIME BASE SEL/

F2] key.

The display shows the screen for editing the chosen mark.

Blinking

<Hint>

When the Mark map screen is shown, you can switch the screen to display the position (by time or bar/ beat/clock) or title of each mark by pressing the [TIME BASE SEL] key.

3After viewing the list, press the [EXIT/NO] key.

The display returns to the Normal screen.

3Use the [CURSOR / ] keys to highlight (and flashes) the field you want to edit, and then use the [JOG] dial

to select the desired value.

When the time base is set to "ABS" or "MTC", you can edit fields for minute, second, frame and subframe. When the time base is set to "Bar/Beat/Clk", you can edit fields for bar, beat and clock, as shown below.

4After editing time (or bar/beat/clock),press the [ENTER/ YES] key.

The edited value is stored to the mark and the display returns to the Mark map screen.

5Press the [EXIT/NO] key.

The display returns to the Normal screen.

69