Installing the IronPoint 250 Access Point

access point must be mounted with the RJ-45 cable connector oriented upwards to ensure proper operation.

Do the following to attach the access point to the wall using the mounting bracket:

1.Using the mounting bracket, mark the position of the four screw holes on the wall. For concrete or brick walls, you will need to drill holes and insert wall plugs for the screws.

2.Position the mounting bracket over the wall screw holes, then insert the included screws and tighten them down to secure the bracket firmly to the wall. Use 5/8-inch number 12 wood screws or a near equivalent (not included in the package contents).

3.Attach the access point to the mounting bracket. Line up the two mounting points on the bracket with the two mounting slots on the bottom of the access point (see the following figure). Place the mounting points of the bracket into the mounting slots of the bracket, slide it into position so that the bracket fastening screw on the access point lines up with the tab on the bracket. Then screw down the fastening screw to secure the access point to the bracket.

Figure 4-2. Installing the Access Point on the Mounting Bracket

Fastening Screw

Mounting Points

 

Align this tab with the

Fastening Screw

Bracket

Mounting Slots

4.Position the antennas along the same axes. Each antenna emits a radiation pattern that is toroidal (doughnut shaped), with the coverage extending most in the direction perpendicular to the antenna. Therefore, the antennas should be oriented so that the radio coverage pattern fills the intended service area. Also, the diversity antennas should both be positioned along the same

August 2007

© 2007 Foundry Networks, Inc.

4-3

Page 30 Page 32
Page 31
Image 31
Foundry Networks 250 manual Installing the Access Point on the Mounting Bracket
Page 30 Page 32

250 specifications

Foundry Networks, a prominent player in the networking hardware industry, has garnered attention for its innovative solutions aimed at enhancing enterprise and service provider networks. Among its notable offerings is the Foundry Networks 250 series, a versatile and robust layer 2/3 switch designed to tackle the demands of modern networking environments.

One of the main features of the Foundry Networks 250 is its high-performance switching capabilities. It supports Gigabit Ethernet ports, allowing for rapid data transfer rates that cater to the needs of bandwidth-intensive applications. With its ability to handle multiple 10/100/1000 Mbps connections simultaneously, the 250 series ensures low latency and reliable performance, making it an ideal choice for both small to medium-sized businesses and larger enterprise networks.

The Foundry Networks 250 series also shines in its flexibility and scalability. It comes equipped with numerous slots for expansion modules, enabling organizations to easily add or upgrade their network functionality as their requirements evolve. This modular design is a significant advantage, allowing network managers to customize their switches in accordance with specific operational needs without having to replace the entire unit.

Another distinctive characteristic of the Foundry Networks 250 is its advanced Layer 3 routing capabilities. Equipped with various protocols such as RIP, OSPF, and BGP, the switch can efficiently manage complex routing tasks and provide enhanced network segmentation. This functionality not only simplifies network management but also boosts overall efficiency by enabling load balancing and improved traffic distribution.

Security is a critical concern in modern networking, and the Foundry Networks 250 addresses this with features like access control lists (ACLs), port security, and VLAN support. These capabilities enable organizations to establish secure network boundaries and safeguard their data from unauthorized access, ensuring that sensitive information remains protected.

Moreover, the Foundry Networks 250 supports a variety of management protocols including SNMP and RMON, which facilitate monitoring and configuration via network management systems. This ease of management is essential for IT teams that need to maintain optimal network performance without dedicating excessive time and resources.

In summary, the Foundry Networks 250 series combines high-performance switching, flexibility, advanced routing capabilities, robust security features, and ease of management. This comprehensive array of technologies and characteristics makes it an excellent choice for any organization seeking to optimize its network infrastructure today and in the future.
Top Page Image Contents