Installing the IronPoint 250 Access Point
US-UNITED_STATES, UY-URUGUAY, VE-VENEZUELA, VN-VIETNAM
5.Configure the TCP/IP address. The default IP address for the access point is 169.254.1.1 with a 255.255.0.0 subnet mask and a default gateway of 169.254.1.254. To change the access point's IP address, for example, to 192.168.1.10 with a
Foundry AP#configure
Foundry AP(config)#interface ethernet
Foundry
Foundry AP #
Syntax: interface ethernet
ip address
6.Confirm the Country Code and TCP/IP settings with the show system command. Do not proceed unless the information displayed is correct. For example, to confirm the country code of the United Kingdom and the TCP/IP address of 192.168.8.10/24, enter:
Foundry AP # show system
Syntax: show system
The command displays the following information:
Foundry AP # show system
System Information
============================================================
Serial Number | : SACC1200KA | |
System Up time | : 0 | days, 0 hours, 5 minutes, 25 seconds |
System Name | : Foundry AP | |
System Location | : |
|
System Contact | : Contact | |
System Country Code | : GB - UNITED KINGDOM | |
MAC Address | : | |
IP Address | : | 192.168.8.10 |
Subnet Mask | : | 255.255.255.0 |
Default Gateway | : | 192.168.8.254 |
VLAN State | : | DISABLED |
Management VLAN ID(AP): | 1 | |
IAPP State | : | ENABLED |
DHCP Client | : | DISABLED |
HTTP Server | : | ENABLED |
HTTP Server Port | : | 80 |
HTTPS Server | : | ENABLED |
HTTPS Server Port | : | 443 |
Slot Status | : | Dual band(a/g) |
Software Version | : | 01.2.03.00Tw8 |
SSH Server | : | ENABLED |
SSH Server Port | : | 22 |
Telnet Server | : | ENABLED |
============================================================
7.Power down the access point.
8.Connect one end of the Ethernet cable to the
August 2007 | © 2007 Foundry Networks, Inc. |
