Mounting the hood body | 12.d | |
• Screw the two screws 12d supplied onto the brackets 7.1. |
| |
• Hook the hood body onto the bracket 7.1, centring it around |
| |
the vertical line. |
| |
• Use the adjusting screws 12d underneath the hood to level the | 7.1 | |
hood body. | ||
|
Note: The Hood body should be secured to wall studs. If neces- sary, install a wood support behind the dry wall, flush mounted between 2 studs. This will provide the necessary structure and support for mounting.
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using a rigid 6” duct.
•Install the damper 10 ø 6”.
•Fix the duct in position using sufficient pipe clamps (not sup- plied).
DUCTLESS VERSION AIR OUTLET
•Put connection 15 into the connection support 7.3.
•Fix to the support using the 2 screws 12e supplied
•Connect the air outlet connection 15 to the hood body outlet using either a rigid ø 6” pipe(not supplied).
•Ensure that the activated charcoal filters have been inserted.
10
15
12e
EN |
| 9 |
| 9 |
