| ELECTRICAL CONNECTION |
|
• | Remove the cover from the Field Wiring Compartment with a | Green |
| phillips screwdriver. | |
| Ground | |
• | Feed the Power Supply Cable through the electrical knockout. | screw |
| Connect the Power Supply Cable to the range- hood cable. At- |
|
| tach the Power Supply Cable grounding lead to the green screw |
|
| provided. Attach the White lead of the power supply to the |
|
| White lead of the rangehood with a |
|
| tor. Attach the Black lead of the power supply to the Black |
|
| lead of the rangehood with a |
|
• | Replace the cover. |
|
| Chimney assembly |
|
Upper exhaust Chimney |
| |
• | Slightly widen the two sides of the upper flue and hook them |
|
| behind the brackets 7.3 and 7.2.1, making sure that they are | 2.1 |
| well seated. | |
|
| |
• | Secure the sides to the brackets using the 4 screws 12c sup- | 2 |
| ||
| plied. | 2.2 |
•Make sure that the air outlet connection is aligned with the chimney outlets.
Lower exhaust Chimney
•Slightly widen the two sides of the chimney and hook them between the upper chimney and the wall, making sure that they are well seated.
•Fix the lower part laterally to the hood body using the 2 screws 12c supplied.
Ground wire
Power supply cable
12c
12c
12c
EN |
| 1 |
| 10 |
