Note

The cooking zone appears incandescent until the heat level corresponding to the selected power is reached; when the level is reached, an electronic device deactivates and activates the heating element to keep the temperature constant. The heating element will be alternately incandescent or switched off.

Automatic switching off

After switching on, the control panel remains activated for 10 seconds; the hob switches off automatically if no cooking zone is selected.

If a cooking zone is selected but without increasing the power, after 10 seconds the zone is automatically deselected and the hob switches off after another 10 seconds.

Switching off the cooking zone

Activate the control zone with the selection button . By pressing the buttons and at the same time,

the power level of the zone will be brought to 0. Alternatively, the button can be used to decrease the power level to 0. The outer circuit can be switched off separately from the inner circuit by pressing the button

, after reactivating the control zone by pressing the button .

Switching off both circuits at the same time

Both circuits can be immediately switched off at any time by means of the

ON/OFF button; an “H” appears if the cooking zone is still hot. The ON/OFF button is always active, even if the control panel lock (child safety device) has been set.

Automatic preheating at maximum power function

It starts the cooking, exploiting the maximum power, and then

 

 

 

 

automatically reduces it to the required level.

power

Power

AHT

OTL

When the automatic preheating function is activated, the power of

level.

(%)

(s)

(min)

the cooking zone is at 100% for a given time that depends on the

 

 

 

 

 

 

 

 

1

3

60

360

power level selected (see table opposite, column AHT). At the end

 

 

 

 

of the heat-up time the cooking zone returns to the preset power

2

6.5

180

360

level.

 

 

 

 

 

 

 

 

3

11

288

300

To activate automatic heat-up, proceed as follows:

 

 

 

 

4

15.6

390

300

• with the hob switched on, activate the control zone;

• when power level 9 is reached, automatic heat-up is activated by

5

19

510

240

immediately pressing the button

again, and the symbol “A”

 

 

 

 

6

31.8

210

90

appears on the display;

 

 

 

 

 

 

• then select the power level required for cooking, using the

7

45.1

210

90

button

and possibly the button

. The display will show the

 

 

 

 

8

64.5

270

90

selected level;

 

 

 

 

 

 

9

100

---

90

• after a few seconds the symbol “A” will appear on the display,

 

 

 

 

alternating with the selected power level. At the end of the

AHT = Automatic Heat Up Time

automatic heat-up stage (see table opposite) the display will only

OTL = Operating Time Limitation

show the preset power level;

 

 

 

 

 

to increase the preset power, press the button; in which case the automatic heat-up time will be adapted to the selected setting;

This function can be stopped by pressing the button , a few seconds after the “A” appears on the display.

Residual heat indicator

After switching off the cooking zone, the corresponding display shows “H”, indicating that the glass surface is still hot, until the temperature of the zone falls below the critical level (approx. 60°C). During this stage do not clean or touch the cooking zones.

Automatic switching off function (operating time limit)

In relation to the power level, each cooking zone is switched off after a max. set time if no operation is carried out (see the table above, column OTL).

Every operation on the cooking zone by means of the buttons and resets the maximum operating time of the zone to its max. value.

Automatic protection of the cooking zones and electronic circuit

The hob has several systems that protect against possible overheating which could damage the electronic components. If the cooking zone is switched on without placing a pot on it, the power is automatically reduced to minimum. If the cooking zone is used at high power for a long time, the hob automatically switches off and error code E2 appears (see the section “Support”). Therefore prolonged use at high power is inadvisable.

11

Page 12
Image 12
Franke Consumer Products FHPL 301 1CO Automatic switching off, Switching off the cooking zone, Residual heat indicator

FHPL 301 1CO specifications

The Franke Consumer Products FHPL 301 1CO is a high-quality kitchen appliance that reflects the company's commitment to innovation and functionality. Designed to seamlessly integrate into modern kitchens, this product stands out for its user-friendly features and advanced technology aimed at enhancing culinary experiences.

One of the key features of the FHPL 301 1CO is its spacious capacity. Its thoughtfully designed layout offers ample room for cooking large meals, making it ideal for families or those who love entertaining guests. The appliance's streamlined design not only optimizes space but also adds a touch of elegance to any kitchen.

The FHPL 301 1CO is equipped with advanced cooking technologies that ensure optimal performance. The inclusion of precise temperature control allows users to achieve perfect results every time, whether it’s baking, simmering, or grilling. Moreover, the appliance features a rapid heating element that significantly reduces cooking time, making it a perfect choice for those with busy lifestyles.

Another standout characteristic of the FHPL 301 1CO is its energy efficiency. Designed with eco-friendly technologies in mind, this appliance minimizes energy consumption without compromising performance. This not only contributes to cost savings on utility bills but also aligns with the growing consumer demand for sustainable products.

The user interface of the FHPL 301 1CO is intuitive and easy to navigate. It features a digital display that allows users to monitor cooking times and temperatures accurately, eliminating guesswork in the kitchen. The appliance also offers multiple cooking modes and presets, catering to various culinary preferences and making it suitable for a wide range of recipes.

Maintaining the FHPL 301 1CO is hassle-free, thanks to its easy-to-clean surfaces and components. The design incorporates materials that resist stains and food build-up, ensuring that the appliance remains in excellent condition over time.

In conclusion, the Franke Consumer Products FHPL 301 1CO is an exemplary kitchen appliance that combines modern design with advanced cooking technologies. Its generous capacity, energy efficiency, and ease of use make it an attractive option for homeowners looking to elevate their cooking experience. Whether preparing simple meals or hosting elaborate dinner parties, the FHPL 301 1CO is a versatile companion that promises consistent performance and reliability, making it a valuable addition to any kitchen.