Do not allow children to touch:

-the controls or the appliance in general;

-the packing components (bags, polystyrene, staples, etc.);

-the appliance, during and immediately after use, since the hob becomes very hot;

-an unused appliance (make any potentially hazardous parts safe).

Do not:

-touch the appliance with wet parts of the body;

-use the appliance when barefoot;

-pull the appliance or power cable to unplug it;

-carry out improper or hazardous operations;

-leave the power cables of other electric appliances on hot parts of the appliance;

-expose the appliance to atmospheric agents;

-use the appliance as a support top;

-use flammable liquids near the appliance;

-use adapters, multi-sockets or extension leads;

-allow anyone except qualified personnel to install or repair the appliance.

Important

-Do not place unstable or deformed pots on the hotplates, since they may tip over or cause spills.

-Pay particular attention to the applicable regulations on ventilation. The use of a cooking appliance produces heat and humidity in the room where it is installed. Make sure the room is adequately ventilated: keep natural ventilation openings open, or install a mechanical ventilation device (extractor hood with exhaust duct). In case of intensive or prolonged use of the appliance, it may be necessary to provide additional ventilation, for example by opening a window, or more efficient ventilation, by increasing the fan speed (if present).

-If the vitroceramic surface is broken or cracked, disconnect the hob from the power supply to prevent any possibility of electric shock. Do not use the hob if the vitroceramic surface is broken or cracked: contact the authorised Technical Service Centre to repair the product.

The manufacturer declines any liability for damage due to: incorrect installation, improper, incorrect or unreasonable use.

Installation

Operations for appliance installation are described below. These procedures must be carried out by qualified personnel in compliance with current local regulations, as installation by an unskilled person may constitute a hazard.

The manufacturer declines any liability for injury to persons or damage to things due to non- compliance with these provisions.

Preparing the cabinet

This handbook refers to a class 3 built-in hob.

Prepare the hole in the top according to the measurements given in fig.1 on page 2.

Fitting in the cabinet

After carrying out the operations for connecting the power cable to the power supply, following the relevant instructions, apply the sealing strip around the hole and position the hob. Carefully tighten the fixing hooks (see fig. 2 on page 2). Remove any excess sealing strip.

Note

If the appliance is not installed above an oven, a separator baffle must be arranged (see fig. 3 on page 2).

If the oven underneath does not have forced cooling ventilation, a panel separating the oven compartment from that of the vitroceramic hob must also be provided, so that the hob control electronics are not affected by the heat coming from the oven. The openings on the bottom of the hob must not be obstructed in any way. Lasting safe and optimum performance of the appliance can be ensured only in this way.

14

Page 14 Page 16
Page 15
Image 15
Franke Consumer Products FHPL 301 1CO Installation, Do not allow children to touch, Preparing the cabinet
Page 14 Page 16

FHPL 301 1CO specifications

The Franke Consumer Products FHPL 301 1CO is a high-quality kitchen appliance that reflects the company's commitment to innovation and functionality. Designed to seamlessly integrate into modern kitchens, this product stands out for its user-friendly features and advanced technology aimed at enhancing culinary experiences.

One of the key features of the FHPL 301 1CO is its spacious capacity. Its thoughtfully designed layout offers ample room for cooking large meals, making it ideal for families or those who love entertaining guests. The appliance's streamlined design not only optimizes space but also adds a touch of elegance to any kitchen.

The FHPL 301 1CO is equipped with advanced cooking technologies that ensure optimal performance. The inclusion of precise temperature control allows users to achieve perfect results every time, whether it’s baking, simmering, or grilling. Moreover, the appliance features a rapid heating element that significantly reduces cooking time, making it a perfect choice for those with busy lifestyles.

Another standout characteristic of the FHPL 301 1CO is its energy efficiency. Designed with eco-friendly technologies in mind, this appliance minimizes energy consumption without compromising performance. This not only contributes to cost savings on utility bills but also aligns with the growing consumer demand for sustainable products.

The user interface of the FHPL 301 1CO is intuitive and easy to navigate. It features a digital display that allows users to monitor cooking times and temperatures accurately, eliminating guesswork in the kitchen. The appliance also offers multiple cooking modes and presets, catering to various culinary preferences and making it suitable for a wide range of recipes.

Maintaining the FHPL 301 1CO is hassle-free, thanks to its easy-to-clean surfaces and components. The design incorporates materials that resist stains and food build-up, ensuring that the appliance remains in excellent condition over time.

In conclusion, the Franke Consumer Products FHPL 301 1CO is an exemplary kitchen appliance that combines modern design with advanced cooking technologies. Its generous capacity, energy efficiency, and ease of use make it an attractive option for homeowners looking to elevate their cooking experience. Whether preparing simple meals or hosting elaborate dinner parties, the FHPL 301 1CO is a versatile companion that promises consistent performance and reliability, making it a valuable addition to any kitchen.
Top Page Image Contents