Installing Book Cards | Selecting a Book |
1.Turn your product off.
2.Turn your product over.
3.Align the tabs on the book card with the notches in the slot.
4.Press the book card down until it snaps into place.
Once a book card is installed in the product, you can select which book you want to use.
1.Turn your product on.
2.Press KARTE.
These are sample books.
3.Press 
or 
to highlight your selection.
➤Removing Book Cards
Warning: Never install or remove a book card while your product is on. Any information that was entered in the builtin book or book card will be erased.
For information on available Franklin Bookman products, high-
light the Bookman Info Icon, 
.
4. Press EINGABE to select it.
➤Book Card Troubleshooting
If your book card is performing erratically, follow the reset instructions on page 72. If this does not fix the problem, remove the book card and then remove the white rubber strip located between the two metal pins. Clean the rubber strip with your fingers and then replace it making sure it is completely in its notch.
➤About Screen Illustrations
Some screen illustrations in this User’s Guide may differ slightly from what you see on screen. This does not mean that your product is malfunctioning. The examples in the English half of this manual use English as the message language.
47