Franklin KJB-640 manual Resetting BOOKMAN, Book Card Care, Troubleshooting Tips

Resetting BOOKMAN Book Card Care

If the BOOKMAN keyboard fails to re- spond, or if its screen performs errati- cally, first press CLEAR and then press ON/OFF twice. If nothing happens, fol- low the steps below to reset it.

Warning: Pressing the reset button with more than very light pressure may perma- nently disable your BOOKMAN. In addi- tion, resetting your BOOKMAN unit erases settings and information entered into its built-in book, and in any installed books.

1.Hold CLEAR and press ON/OFF. If nothing happens, try Step 2.

2.Use a paper clip to gently press BOOKMAN’s reset button.

The reset button is recessed in a pin- sized hole on the back of your BOOKMAN. Look for it on the bat- tery cover or near the book card slot.

➤Troubleshooting Tips

•Make sure your book card, if any, is installed correctly.

•Check that the book card’s metal contacts are dirt- and dust-free.

•Do not damage the contacts on the book card or slot. Caution: Touching these electrical contacts with statically charged ob- jects, including your fingers, could erase information entered in a book card or built-in book.

•Do not put excessive pressure on the book cards.

•Do not expose the book cards to heat, cold, or liquids.

14