Franklin Resetting BOOKMAN Copyrights and Patents, Troubleshooting BOOKMAN, Model MWD-640

Resetting BOOKMAN Copyrights and Patents

If the BOOKMAN keyboard fails to respond, or if its screen performs erratically, first press CLEAR and then press ON/OFF twice. If nothing happens, follow the steps below to reset it.

Warning: Pressing the reset button with more than very light pressure may perma- nently disable your BOOKMAN. In addition, resetting your BOOKMAN unit erases set- tings and information entered into its built- in book, and in any installed books.

1.Hold CLEAR and press ON/OFF. If nothing happens, try Step 2.

2.Use a paper clip to gently press BOOKMAN’s reset button.

The reset button is recessed in a pin- sized hole on the back of your BOOKMAN. Look for it on the bat- tery cover or near the book card slot.

➤Troubleshooting BOOKMAN

•Make sure your book card, if any, is installed correctly.

•Check that the book card’s metal contacts are dirt-and dust-free.

Model MWD-640

•batteries: 4-AAA, 1.5 volt

•size: 14 x 2.5 x 10.3 cm

•weight: 6 oz. (without batteries) © 1987-1996 Franklin Electronic Publishers, Inc., Burlington, NJ 08016-4907 USA. All rights reserved. © 1989 Merriam-Webster, Inc.

All rights reserved.

FCC Notice: Complies with the limits for a Class B computing device pursuant to Subpart B of part 15 of FCC Rules. Opera- tion is subject to the following two conditions:

(1) This device may not cause harmful inter- ference; and (2) This device must accept any interference received, including interference that may cause undesired operation.

U.S. Patents 4,490,811; 4,830,618; 4,891,775; 5,007,019; 5,113,340; 5,203,705; 5,218,536; 5,249,965; 5,333,313; European Patent 0 136 379. Pat. Pend.

ISBN 1-56712-133-0

This unit may change operating modes due to Electro-static Discharge. Normal opera- tion of this unit can be re-established by pressing the reset key, ON/OFF, or by removing/replacing batteries.

16