Bang & Olufsen 1200 manual Worth knowing about troubleshooting

Worth knowing – about troubleshooting				36
Symptom	Possible cause	Possible correction
The answering machine function cannot	No announcement has been recorded for	Record an announcement and activate
be activated	the type of announcement chosen	the type of announcement
A new number is shown in the display,	• Rejection of incoming calls has been
but you will hear only one ringing tone	activated
	• The ringing time has been set to 4
	seconds
Some subscribers cannot call you	The numbers exist in the Rejection list,
	and the function has been activated
The display is illuminated though all	There are further new messages (Caller	Scroll through the News list
messages have been played	ID calls or messages)
is shown in the display and the	• BeoTalk 1200 has not been connected	• Connect BeoTalk 1200 to the
display is illuminated	to the telephone plug		telephone plug
	• A telephone is off-hook	• Replace the handset
BeoTalk 1200 answers the call sooner	New messages received and at the same
than the pre-programmed ringing time	time the Toll saver has been activated
The phone rings more than one time	• Technical limitations
when using Rejection of incoming calls	• Rejection has not been activated
The index numbers are not shown in the	The phone numbers have more than 10
display as described in this guide	digits
BeoTalk 1200 continues to play the	BeoTalk 1200 has not registered that you	•	Replace the handset briefly
announcement after you have answered	have answered the call		or
the call		•	Press the NEWS or STORE key on
			BeoTalk 1200