Installation
BeoTalk 1200 can be either placed on the table or mounted on the wall using the enclosed bracket and screws.
BeoTalk 1200 should not be placed in dusty or dirty environments, nor be exposed to direct moisture.
Installation of BeoTalk 1200 | 14 |
Wall mounting
•Mount the wall bracket using the enclosed screws.
•Lead the cord down through the slot on the back of BeoTalk 1200.
•Lead the cord behind the pin on the wall bracket so that the cord is held against the wall.
•Place BeoTalk 1200 on the wall bracket.
Connection
•Connect the cords as shown on the drawing.
•Insert the wall plug into your telephone wall jack.
•Insert the A/C adapter into the A/C wall plug.
By using the enclosed adapter you are able to connect both your telephone and the BeoTalk 1200 to the same tele- phone wall jack.
If you want to extend the cords, please be aware that only the cord from LINE to the telephone network can be extended. Exchanging the other cords will affect the functions of BeoTalk 1200.
In order for Caller ID to function, the BeoTalk 1200 must be connected before the switchboard, if any.
