Bang & Olufsen 1200 manual Symptom Possible cause Possible correction

Symptom	Possible cause	Possible correction
The remote control does not work	• The PIN-code has not been entered	• Enter the access code
	• The telephone from which you call	• Call from another telephone
	does not transmit tones
	• BeoTalk 1200 is being operated locally	• Try call again later
	• The connection is poor	• Call from another telephone
BeoTalk 1200 is ”dead”	BeoTalk 1200 has been incorrectly	Check the connection
	connected
A number called from a parallel	The telephone from which you call does
telephone is not shown in the display	not transmit DTMF tones
The clock does not show the correct time	Power failure	Set the clock
While playing messages using remote	A message contains DTMF tones	• Press	and continue the operation, or
control, BeoTalk 1200 executes		• Replace the handset and call again
commands you have not asked for
BeoTalk 1200 answers a Call-back	BeoTalk 1200 registers the call as an	Deactive the answering machine function
	ordinary call	until the Call-back has been concluded
The telephone answering machine does	• The telephone answering function has	• Activate the answering machine
not answer a phone call when ringing	been deactivated	function
	• The ringing time is too long	• Set the ringing time
It is not possible to record a new	Memory is full	Press C to delete the old announcement
announcement		(while playing the announcement)
Voice Announcement, Group	The complete telephone number,	Store the complete number (at least three
Announcement and Rejection of	including area code, has not been stored	and maximum 13 digits). Please note that
incoming calls do not function	in the list	in some regions you need not to enter the
		area code. This you will know by looking
		at the display seeing how the incoming
		phone numbers are shown. You must store
		your numbers in the same way

37