WARNING Allow no source of combustion near the work area. Be careful not to cause sparks when working on fuel dispensing equipment. Failure to follow these directions may cause an explosion hazard, which could result in property damage and death.

WARNING These containment sumps can trap dangerous amounts of hydrocarbon vapors.

If these vapors are inhaled they could cause dizziness or unconsciousness. If the vapors were ignited they could explode causing serious injury or death.

CAUTION Refer to all applicable Federal, State, City and local codes, your National

Electric Code (NEC), and the Automotive and Marine Service Station Code (NFPA 30A in the USA) before installation or maintenance. This installation is designed for submersible pumps which have a Pump Control box in the station. If a pump control box does not exist, then the system must be retrofitted to add a pump control box in the facility to comply with Codes.

CAUTION Before entering a containment sump check for the presence of hydrocarbon vapors, if vapor levels are unsafe ventilate the sump with fresh air. While working in the sump periodically check the atmosphere in the sump, if vapors reach unsafe levels exit the sump and ventilate it.

CAUTION ALWAYS have a second person standing by for assistance when working in or around a containment sump. Electronic and electrical petroleum monitoring equipment is often housed in containment sumps designed to trap hazardous liquid spills and prevent contamination of the environment.

CAUTION Petroleum is carcinogenic – use adequate protection to avoid health hazards.

ALWAYS cleanup and dispose of used absorbent/rags and petroleum resistant gloves in approved waste containers. Cleanup refuse and dispose of these immediately to avoid personnel injury from vapors or direct skin contact to also avoid possible fire or environmental safety hazards.

SAFETY

Page 1-3

TS-TPI Installation and Wiring Guide

1

Page 5 Page 7
Page 6
Image 6
Franklin TS-TPI manual Safety
Page 5 Page 7

TS-TPI specifications

The Franklin TS-TPI (Total Pipeline Inspection) is a cutting-edge tool designed to revolutionize pipeline inspections across various industries, including oil and gas, water, and wastewater management. This advanced technology enables operators to assess the integrity of pipeline systems efficiently and accurately, ensuring safety and compliance with regulatory standards.

One of the main features of the Franklin TS-TPI is its ability to perform comprehensive inspections using a variety of sensors and imaging technologies. It incorporates high-definition cameras that provide detailed visual representations of the pipeline's interior, allowing for real-time monitoring and evaluation. Additionally, it leverages ultrasonic and electromagnetic sensors to detect anomalies such as corrosion, leaks, and structural defects—critical factors that could lead to catastrophic failures if left unaddressed.

The Franklin TS-TPI employs innovative robotics and autonomous capabilities, enabling it to navigate complex pipeline systems with ease. Its modular design allows for customization based on the specific needs of a pipeline, with attachments that can be added or removed as required. This flexibility not only enhances its functionality but also extends the lifespan of the equipment by allowing operators to upgrade sensors and technology as new advancements emerge.

Another notable characteristic of the Franklin TS-TPI is its data management capabilities. The system collects vast amounts of inspection data, which can be analyzed using advanced software solutions. This technology provides operators with insights into the condition of their pipelines, helping them make informed decisions regarding maintenance and repairs. Predictive analytics can also be applied to assess the likelihood of future failures, allowing for proactive actions to prevent costly disruptions.

The Franklin TS-TPI's user-friendly interface and powerful reporting tools enhance its usability, making it accessible to a wide range of professionals. With easy integration into existing pipeline management systems, it can streamline operations, improve response times to potential issues, and help operators meet compliance and safety standards more effectively.

Overall, the Franklin TS-TPI represents a significant leap forward in pipeline inspection technology. Its combination of advanced imaging, sensor technology, robotics, and data analytics creates a robust solution that addresses the challenges faced by industries reliant on pipeline infrastructure. By ensuring the integrity and operational efficiency of pipelines, the Franklin TS-TPI not only protects valuable resources but also promotes environmental sustainability and public safety.
Top Page Image Contents