4Page 4-6 TS-TPI SETUP PROGRAMMING
TS-TPI Installation and Wiring Guide
ADDRESS “READ ONLY”
Description of Steps:
1) Press the M4 key to display the ADDRESS
PUMP N “READ ONLY” field...
In this example, address “0” is displayed...
The address range is from 0-31.
2) Press the CANCEL key to return to the PUMP
N menu.
Press the DOWN key to display the TANK and
HEIGHT user entry menus...
TANK (user entry)
Description of Steps:
1) Press the M1 key to display the TANK ASSO-
CIATION PUMP N user entry field...
The default TANK ASSOCIATION number “0” is
displayed...
The user selects the tank number associated with
PUMP N. The values range from 0-8(0=none, or
the maximum number of tanks available for the
ATG model)
NOTE: This will allow a pump to be associated
with a tank. If the pump is not associated with a
tank (i.e. for level monitoring by the tank gauge),
then NONE may be chosen, but this will disable
some features of the pump controller interface for
that controller. If a tank has multiple pumps in it,
more than one controller may be associated with
the tank.
2) Use the keypad to enter the tank number.
In the event that a number is already entered and
needs to change, press the M4 key to backspace
and erase the entry. The default “0” tank number
will be displayed.
M1 M2 M3 M4
CANCEL
K X
DOWN
SPACE
M1 M2 M3 M4