LINE REPORTS SETUP Page 7-1 7
TS-TPI Installation and Wiring Guide
7 LINE Reports SETUP
Use this menu to program reports
to print or FAX automatically on a
schedule (faxing requires an
optional Fax/Modem device).
See Tank Sentinel Setup
Programming Guide Chapters 1,
10, 11 and 12 about Tank and
Line Test Reports & Scheduling.
See TABLE 7.1 – The SHIFT
selection allows 2 or 3 scheduled
reports to print or Fax per day
...only one report will print if two
report-times are duplicated /
identical.
The asterisked (*) menus are
hardware or software dependent
and may or may not appear.
Push UP/DOWN ▲
▼ keys to show
more menus or menu selections.
To access menus, press the
corrsponding (M) key below each
menu name.
— Continued on next page —

Reports Menu

Press the DOWN ▼ key...
Press the DOWN ▼ key until the Line Comp, Line
Diag, Line Hist and Line Test menus are shown.
M1 M2 M3 M4
M1 M2 M3 M4
H U
MENU ½Press this key in the highlighted
7sequence shown below
TABLE 7.1 Typical Report Schedule
NONE
(no schedule)
SHIFT 1ST DAY
DAILY :
MONDAY 30TH DAY
: LAST DAY
SUNDAY (Feb. does not have 30 days)
TABLE 7.2 24 Hour Time Input Format
HH:MM:SS
00:00:00 = midnight
22:00:00 = 10 pm + 12 ( hours )
( add 12 hours to pm times starting at
1 pm to 11:59 pm )
02:05:00 = 2:05 am