Franklin XGT-2043 manual Resetting Your Bookman Book Card Care, Troubleshooting Bookman

Resetting Your BOOKMAN Book Card Care

If the BOOKMAN keyboard fails to re- spond, or if its screen performs errati- cally, first press CLEAR and then press ON/OFF twice. If nothing happens, follow the steps below to reset it.

Warning: Pressing the reset button with more than very light pressure may perma- nently disable your BOOKMAN. In addition, resetting your BOOKMAN unit erases set- tings and information entered into its built- in book, and in an installed book.

1.Hold CLEAR and press ON/OFF . If nothing happens, try Step 2.

2.Use a paper clip to gently press BOOKMAN’s reset button.

This unit may change operating modes due to Electro-static Discharge. Normal operation of this unit can be re-estab- lished by pressing the reset key, ON/OFF , or by removing/replacing batteries.

➤Troubleshooting BOOKMAN

•Make sure your book card, if any, is installed correctly.

•Check that your book card’s metal contacts are dirt-and dust-free.

•Do not touch the metal contacts on your book cards. Caution: Touching these electrical contacts with statically charged objects, including your fingers, could erase information entered in a book card or built-in book.

•Do not put excessive weight on your book cards.

•Do not expose your book cards to heat, cold, or liquids.

16