•Plug into a grounded
•It is recommended that a separate circuit, serving only your ice maker, be provided. Use receptacles that cannot be turned off by a switch or pull chain.
•Do not connect or disconnect the electric plug when your hands are wet.
•Never unplug the ice maker by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.
•Never clean ice maker parts with flammable fluids. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
•Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is disconnected and the water line is shut off. (EXCEPTION: When cleaning the machine’s ice making and water systems, see pages 18 – 19.)
•Before operating, put all the enclosure panels back into their original places.
•Do not touch the evaporator with your hand when the machine is operating.
•Unplug the ice maker or disconnect power before cleaning or servicing. Failure to do so can result in electrical shock or death.
•Do not attempt to repair or replace any part of your ice maker unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
•Use two or more people to move and install ice maker. Failure to do so can result in back or other injury.
•To ensure proper ventilation for your ice maker, the front of the unit must be completely unobstructed. Choose a
•The ice maker should not be located next to ovens, grills or other sources of high heat.
•The ice maker must be installed with all electrical and water connections in accordance with state and local codes. A standard electrical supply (115 VAC only, 60 Hz, 15 A), properly grounded in accordance with the National Electrical Code and local codes and ordinances, is required.
•Do not kink or pinch power supply cord or drain lines between ice maker and cabinet.
•The fuse (or circuit breaker) size should be 15 amperes.
•It is important for the ice maker to be leveled in order to work properly. You may need to make several adjustments to level it.
•All installations must be in accordance with local plumbing code requirements.
•Make certain that the hoses are not pinched or kinked or damaged during installation.
•Check for leaks after connection.
•Remove the packing materials and clean the ice maker before using.
•Turn on the water supply tap before switching on the ice maker. Never turn the water supply tap off when the ice maker is working.
•Except to take ice from the unit, keep the door closed in order to reduce ice melting and to promote proper ice formation.
•Although the unit has been tested at the factory, due to
•If the ice maker will not be used for a long time, before the next use it must be thoroughly cleaned. Follow carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any solution inside the ice maker after cleaning.
•DO NOT touch the condenser fins. The condenser fins are sharp and can be easily damaged.
•DO NOT use
•The ice machine cleaner contains acids. DO NOT use or mix with any other solvent- based cleaner products. Use rubber gloves to protect hands. Carefully read the
3
