Franklin Industries, L.L.C FIM200 S. Adjust screw Ice size adjustment, Power switch, Clean button

3.Ice Harvest (Yellow) LED: Ice Harvest indicator light

When this LED is on, the unit is working in the ice harvest mode controlled by the ice-full probe.

4.I. S. Adjust screw: Ice size adjustment

Turn the screw clockwise and the size of individual ice cubes will be larger in the next cycle; the cycle time will be longer. Turn the screw counter-clockwise, and the ice cube size will be smaller in the next cycle.

5.Power switch

This is the main switch. When it is turned on, the unit goes into Stand-by mode for about 3 minutes, with all LEDs on, then starts to make ice cubes automatically, switching between ice-making and ice harvest modes.

6.CLEAN button

While the unit is in Stand-by mode (all LEDs on steady), you can press CLEAN to start the Automatic Clean procedure. The green and yellow LEDs will flash together.

NOTE: When you finish working with the control panel, close the cover.

IMPORTANT:

•It is recommended that the ice cube size not be adjusted more often than necessary since this could damage the machine’s controls.

•Avoid letting water contact the control box.

•When you finish working with the control panel, close the cover.

20