7
EN

1

Hardware Installation

Chapter 1: Hardware Installation
WARNING! Only connect the Network D rive XS via the USB or LAN Port .
Never use both ports at the same t ime!
1. Plug the cable (USB or LAN) into the Freecom Network
Drive XS.
2. Insert the power cord into the Freecom Network Drive XS
and plug the power supply into the socket.
3. Plug the cab le into t he port (USB or L AN) on y our
computer.
Because USB 2.0 is ba ckwards compatible wi th USB 1.1, you can connect the Freecom
Network Drive XS to any USB port. Please note however that USB 2.0 ports su pport
significantly higher data transfer speeds than USB 1.1.
Driver Instal lation: Your comp uter w ill no t requ ire a speci al Free com
driver if you are u sing Windows XP / Vista / 7 or MacOS X. The requi red
driver is automatically installed by the operating system when the cable
is plugged into your computer.