Freescale Semiconductor 802.15.4 manual Ported Targets, Axiom AXM-0308

1.1.1 Ported Targets

The Embedded Bootloader must be ported (I/O mapped) to a specific PCB for proper functionality and is currently ported to the following Freescale PCBs:

Axiom AXM-0308:
•	PC Communication Interface:	RS232/UART on COM1 (SCI1)/
		RS232/UART on COM2 (SCI2)
•	Safe Mode Boot	Short pins 2-3 on COM1 (SCI1)/
		COM2 (SCI2)
•	Version Number	“AX-0308 Ver 5.01”
DIG528-2 EVK
•	PC Communication Interface:	RS232/UART on COM1 (SCI1)/
		USB (SCI2)
•	Safe Mode Boot	Short pins 2-3 on COM1-port (SCI1)
•	Version Number	“528&536 Ver 5.01”
DIG536-2 SARD
•	PC Communication Interface:	RS232/UART on COM1 (SCI1)
•	Safe Mode Boot	Short pins 2-3 on COM1-port (SCI1)
•	Version Number	“528&536 Ver 5.01”
RD01
•	PC Communication Interface:	RS232/UART/USB on COM1 (SCI1)/
		RS232/UART/USB on COM2 (SCI2)
•	Safe Mode Boot	Short pins 2-3 on COM1 (SCI1)/
		COM2 (SCI2)
•	Version Number	“ RD01 Ver 5.01”

NOTE

The generic RD01 target can be used with any PCB using the Freescale Reference Design version 01 I/O layout. The PCB must support at least one communication interface. If a USB is the only interface, use a jumper to short SCI pins 2 and 3 to make Safe Mode Boot available.

Refer to Section 6.3 for details on how to port the Embedded Bootloader to a specific PCB.

1-2 Embedded Bootloader Reference Manual, Rev 0.0 Freescale Semiconductor