Freescale Semiconductor 802.15.4 - page 61

Freescale Semiconductor Embedded Bootloader Reference Manual, Rev. 0.0 8-7

= May be used by Embedded Bootloader. 802.15.4/App.

can reuse this space (overwrite).

= Used by Embedded Bootloader. Data/code which must be located on the specified

address and (must/will) exists when the application is running

= May be used by

802.15.4/App.

= Used by 802.15.4/App. Data/code which must be

located on the specified address

If either the Embedded Bootloader and/or the 802.15.4/App. must not use a particular resource the color

from the "General HCS08 Map and Usage" is kept.

Cursive = fixed register and vectors in flash

Bold = MUST be located on this particular address - DO NOT

CHANGE.

Flash sector 120-127 is block protected and cannot be erased by SW.

Embedded Bootloader

Application

RAM 4096 bytes available

Code 4016

bytes available (not including ISR vectors and

reset vector)

NV-RAM 1024

bytes available. Read and written by Embedded Bootloader (2 sectors are used,

so it occupies 1024 bytes flash).

Contents

Main 802.15.4/Zigbee Embedded Bootloader Reference Manual Page Contents Page Page About This Book Audience Organization Conventions Definitions, Acronyms, and Abbreviations References Revision History Chapter 1 Embedded Bootloader Description 1.1 Target 1.1.1 Ported Targets 1.2 Features 1.3 Benefits 1.4 Potential Issues 1.4.1 Optional Firmware Upload Settings Chapter 2 Using the Embedded Bootloader 2.1 Upload Firmware 2.1.1 Use Case One 2.1.2 Use Case Two 2.1.3 Safe Mode Boot 2.2 Updating Non-volatile Memory (NVM) 2.2.1 An Example of How to Change the MAC Address 2.3 System Bus Frequency 2.4 UART Baud Rate Chapter 3 Test Tool Zigbee Flash Tool 3.1 Graphical User Interface (GUI) Version 3.1.1 Using the Tools Menu Option 3.1.2 Using the View Menu Option 3.1.3 Selecting the Firmware File to Upload Page 3.1.4 Using the Help Menu 3.1.5 Changing the NVM Data in Flash or File Page Page 3.2.1 Normal Use Example (Default) 3.2.2 Flash Erase Disabled Example Page Chapter 4 Embedded Bootloader Programming 4.1 Programming To An Empty (Erased) Board Page Page Page 4.2 Upgrading The Embedded Bootloader Page Page Page Page Page Chapter 5 Application Integration Reference Guide 5.1 Product Deliverables 5.1.1 Embedded Bootloader Image 5.1.2 Application Support Files 5.1.3 Application Linker File 5.2 Application 5.2.1 Compiler Defines 5.2.2 Unreferenced Symbols 5.2.3 System Clock Setup 5.3 Application Support Files 5.3.1 DigiType.h 5.3.2 Gb60_io.h 5.3.3 Crt0.c and Crt.h 5.3.4 Embedded_Bootloader.h and Embedded_Bootloader.c 5.3.5 NV_Data.c and NV_Data.h 5.3.6 ISR_Vectors.c Page Chapter 6 Port Integration Reference Guide 6.1 Embedded Bootloader Build Environment 6.1.1 HCS08 Compiler 6.1.2 HCS08 Linker 6.1.3 HCS08 LibMaker 6.2 Product Deliverables 6.2.1 Embedded_Bootloader.mcp 6.2.2 HCS08_Flash_Lib.Lib 6.2.3 Embedded_Bootloader_Functionality_Lib.Lib 6.2.4 Source Files 6.3 Porting to a Specific Target 6.3.1 Code and Data Segments 6.3.2 Standard Libraries 6.3.3 Compiler #defines 6.4 Source Files 6.4.1 Target.h 6.4.2 Reset_Vector.c 6.4.3 Embedded_Bootloader_Target.h 6.4.4 HW_Init.h 6.4.5 HW_Init.c 6.4.6 main.c Chapter 7 Embedded Bootloader Public Function Description 7.1 802.15.4/Zigbee Application Accessible Functions 7.1.1 Enable_Download_Firmware Page 7.1.2 Hard_Reset 7.1.3 Update_NV_RAM 7.1.4 NV_Flash_Setup 7.1.5 FL_ICG_Setup 7.1.6 UART_Port_Select Page Chapter 8 Embedded Bootloader Memory Map Page Page Page Page Page Page Page Appendix A Release Folder and File Structure A.1. Folder Structure A.2. File Structure