2.The chronograph will then be displayed in its current sate – reset, running or stopped.

3.To resume a counting, press S1 button to resume from where it left off.

4.To start a new counting, reset the chronograph to zero first. Press S2 button to stop counting, then press and hold S2 button for around 3 seconds to reset the counter to zero.

FOR THE MEASUREMENT OF ELAPSED TIME In CHRONOGRAPH mode,

1.Press S1 button to start counting.

2.To stop counting, press S2 button. Press S1 button to resume from where if left off.

3.To reset to zero, press S2 button to stop counting, then press and hold S2 button for around 3 seconds to reset the counter to zero.

FOR THE MEASUREMENT OF SPLIT TIME AND LAP TIME In CHRONOGRAPH mode,

1.Press S1 button to start counting.

2.While the chronograph is running, press S1 button once to register a lap. Both the split time and lap time

will be displayed.

After 3 seconds, the currently accumulated split time and lap time will be displayed.

3.Repeat the last step until all the laps have been registered.

4.To stop counting, press S2 button. Press S1 button to resume from where if left off.

5.To reset to zero, press S2 button to stop counting, then press and hold S2 button for around 3 seconds to

20

Page 19
Image 19
Freestyle Nomad manual For the Measurement of Elapsed Time In Chronograph mode