TO SELECT THE ALARM MODE OF INDIVIDUAL ALARM

1.In individual alarm (AL-1 to AL-5), press and hold S4 button for around 3 seconds. The message “Time-AL” will be displayed.

2.Press S1/S2 button to select time alarm setting mode (Time-AL), altitude alarm setting mode (ALTI- AL) or pressure alarm (BARO-AL).

3.Press S3 button to enter into each setting mode.

4.Press S4 button to return to ALARM mode.

TO SET THE TIME ALARM

In time alarm setting mode,

1.Press S1/S2 button to set the hour digits. Holding down the button will speed up the process.

2.Press S3 button once, the minute digits will blink. Press S1/S2 button to set the minute digits.

3.Press S3 button to set the time zone. Press S1/S2 button to toggle between T1 and T2 time zones.

4.After finishing making all the settings, press S4 button to return to ALARM mode.

TO SET THE ALTITUDE ALARM

In altitude alarm setting mode,

1.Press S1/S2 button to set the altitude value (in units M (meter) or Ft (feet)). Holding down the button will speed up the process.

2.After finishing making all the settings, press S4 button to return to ALARM mode.

NOTE: When altitude arrives or over the set value, a beep sound will be emitted for 20 seconds. Then the alarm will be deactivated automatically.

25

Page 24
Image 24
Freestyle Nomad manual To Select the Alarm Mode of Individual Alarm, To SET the Time Alarm, To SET the Altitude Alarm