Friedrich 9315345288 manual Minimum Heat Operation, Manual Auto Operation, En-12

MINIMUM HEAT OPERATION

•The room temperature can be maintained at 50°F by pressing the MIN. HEAT button (Fig.6 b3) so as to prevent the room temperature from falling too far.

To use MINIMUM HEAT OPERATION

Press the MIN. HEAT button (Fig.6 b3)

The OPERATION indicator lamp (green) (Fig. 3 a5) will go out, and the ECONOMY indicator lamp (green) (Fig. 3 a7) will light.

To stop MINIMUM HEAT OPERATION

Press the START/STOP button (Fig.6 b8)

Then the OPERATION stops and the ECONOMY indicator lamp (green) (Fig. 3 a7) will go out.

●Indicator Lamp

OPERATION TIMER

ECONOMY

: Lighting : OFF

While MINIMUM HEAT OPERATION is in progress, only Airflow Direction Set can be used.

About the MINIMUM HEAT OPERATION

• The Heating mode will not operate if the room temperature is high enough.

MANUAL AUTO OPERATION

Use the MANUAL AUTO operation in the event the Remote Controller is lost or otherwise unavailable.

How To Use the Main Unit Controls

Press the MANUAL AUTO button (Fig. 2 a2) on the main unit control panel.

To stop operation, press the MANUAL AUTO button (Fig. 2 a2) once again. (Controls are located inside the intake grille)

●When the air conditioner is operated with the controls on the Main Unit, it will operate under the same mode as the AUTO mode selected on the Remote Controller (see page 7).

●The fan speed selected will be “AUTO” and the thermostat setting will be stand- ard.(76°F)

9315345288_OM.indb 12

En-12

2/24/2010 1:36:25 PM