![](/images/new-backgrounds/1047950/4795013x1.webp)
OPERATION
To Select Mode Operation
1 | Press the START/STOP button (Fig.6 b8). | ||||||||||||
The indoor unit’s OPERATION Indicator Lamp (green) (Fig. 3 a5) will light. | |||||||||||||
| The air conditioner will start operating. | ||||||||||||
2 | Press the MODE button (Fig.6 b2) to select the de- | ||||||||||||
| sired mode. |
|
|
|
|
| |||||||
| Each time the button is pressed, the mode will change in the following order. | ||||||||||||
|
|
|
| ▲AUTO |
|
| ▲ COOL |
| ▲DRY |
|
| ||
|
|
|
|
|
|
| |||||||
|
|
|
| HEAT | ▲ |
|
|
| FAN ▲ |
|
|
| |
|
|
|
|
|
|
|
|
About three seconds later, the entire display will reappear.
To Set the Thermostat
Press the SET TEMP. button (Fig. 6 b12).
button: Press to raise the thermostat setting.
button: Press to lower the thermostat setting.
●Thermostat setting range:
AUTO | |
Heating | |
Cooling/Dry |
The thermostat cannot be used to set room temperature during the FAN mode (the tem- perature will not appear on the Remote Controller’s Display).
About three seconds later, the entire display will reappear.
The thermostat setting should be considered a standard value, and may differ somewhat from the actual room temperature.
Example: When set to COOL.
Example: When set to 80°F.
To Set the Fan Speed
Press the FAN button (Fig. 6 b7).
Each time the button is pressed, the fan speed changes in the following order:
▲AUTO
▲
HIGH
▲MED
▲
LOW
▲
QUIET
About three seconds later, the entire display will reappear.
When set to AUTO: |
|
|
|
| |
Heating | : Fan operates so as to optimally circulate warmed air. |
|
|
|
|
| However, the fan will operate at very low speed when the temperature of |
|
|
|
|
| the air issued from the indoor unit is low. |
|
|
|
|
Cooling | : As the room temperature approaches that of the thermostat setting, the |
|
|
|
|
|
|
|
| ||
| fan speed becomes slower. |
|
|
|
|
Fan | : The fan runs at the low fan speed. | Example: When set to AUTO. |
The fan will operate at a very low setting during Monitor operation and at the start of the Heating mode.
SUPER QUIET Operation
When set to Quiet:
SUPER QUIET operation begins. The indoor unit’s airfl ow will be reduced for quieter operation.
●SUPER QUIET operation cannot be used during Dry mode. (The same is true when dry mode is selected during AUTO mode operation.)
●During Super Quiet operation, Heating and Cooling performance will be reduced somewhat. If the room does not warm up/ cool down when using SUPER QUIET Operation, please adjust the air conditioner’s Fan Speed.
En-6
9315345288_OM.indb 6
2/24/2010 1:36:20 PM