Remote Control Operation, Special Features

Service Questions: Contact Friedrich at (800) 541-6645

Sales Inquiries: Contact Sylvane at (800) 934-9194 or visit sylvane.com

Remote Control Operation

1.	START / STOP	Turns the Breeze unit on or off.
	▼/▲ Arrow	Press to raise or lower the temperature setting. Temperature
		setting range is between 61�F – 86�F.
2.	FAN/AUTO	Adjusts the fan speed or sets fan to ‘AUTO’ operation.
		Selectable speeds are LOW, MEDIUM, HIGH or AUTO. AUTO will
		automatically adjust the fan speed to maintain the proper set
		point.
3.	MODE	Selects the Breeze operating mode. Select between COOLING ,
		HEATING	, DRY , FAN or AUTO .
		COOLING	mode – the unit will operate as an air conditioner
		to maintain the desired set point.
		HEATING	– the unit will operate as a heat pump to maintain
		the desired set point.

DRY – the unit will operate as an air conditioner on

low speed to reduce humidity levels while not affecting the air temperature as greatly.

FAN – the unit will operate as a fan to circulate air only.

		AUTO	– the unit will operate as an air conditioner or heat
		pump to maintain the desired set point.
4.	SENSOR	Pressing this button prompts the unit to take a reading of the
		room conditions.
5.	CLOCK	Press to set the CLOCK . (CLOCK icon will flash when ready
		to set). Use ▼/▲ to set proper time.
6.	TIMER ON	Press to set the time for the unit to come on. Optional setting,
		only operates when ‘ON’ icon is illuminated on remote.
7.	AIR SWEEP	Press to turn on the AUTO AIR SWEEP function or to set the
		desired angle of the airflow. (Airflow angle is reset each time
		power is turned off)
8.	EXTEND	When on,		will be displayed. In Cooling and Dry mode this
		will allow the unit fan to operate for 10 extra minutes after
		satisfying the temperature set point.
9.	TEMP	Press TEMP button to toggle between displaying the set point or
		room temp on the Breeze unit display.
10.	TIMER OFF	Press to set the time for the unit to turn off. Optional setting, only
		operates when ‘OFF’ icon is illuminated on remote.
11.	TURBO	TURBO mode		operates the unit at maximum performance
		level to bring the room to the set point temperature as rapidly as
		possible. Available in Cooling and Heating mode.
12.	SLEEP	Press to enter SLEEP mode . SLEEP mode automatically
		adjusts the set point by 2 degrees after the first hour of operation
		to provide greater comfort overnight as well as save energy.
13.	LIGHT	Turns the LIGHT on the Breeze unit on or off.

LOCK	You can lock the remote control by pressing the ▼ and ▲ simultaneously.
	Press them again and the remote will unlock.
Fahrenheit	The unit ships with the temperature readout in degrees Fahrenheit.
/Celsius	To change to degrees Celsius press the MODE and ▼ buttons
	simultaneously when the unit is off. Press them again and the remote
	will return to Fahrenheit.