Now that you have determined where the modules will be placed, it is time to install the Breeze air conditioning system.

STEP 2 – Hang wall mount bracket

Using the paper template as a guide, locate two studs behind screw hole locations in the template. It is preferable to mount the hanging plate on studs. If two studs are not available, utilize anchors appropriate for the wall type with a combined weight capacity of at least 60 lbs. Standard wood screws and drywall anchors are provided.

If you are installing the system by drilling a 3” hole through the wall (Option 1), mark the location of the 3” hole centerline on the wall as well

Note that the indoor unit is not centered on the bracket. There is a center line on the paper template which shows where the center of the indoor unit will be after installation.

NOTE: Wall mount bracket ships mounted to the back of the indoor unit with a single Phillips head screw. Remove screw to release the bracket for installation.

STEP 3 – Drill hole (Option 1) or mount SimpleSill™ (Option 2).

Always follow all local and national codes when in- stalling equipment. Obtain the help of trained, skilled worker where necessary.

Option 1: Drill hole Through-the-Wall Installation

Drill 3” hole through the exterior wall.

NOTE: This should only be done by qualified install- ers. Consult local and national codes before drilling any holes. Mark the hole location on the indoor wall using the template. (If locating unit above a window or door, make sure the hole is above structural header)

Using a stud finder, scan area around desired hole loca- tion for pipes, ducts, electrical conductors and struc- tural elements. Relocate indoor unit mounting location as necessary to avoid interference.

Using a 3” hole saw, drill hole through wall from inside toward outside. When hole saw cuts through inside wall, stop drilling. DO NOT drill the entire 3” hole from the inside to prevent insulation and exterior wall damage.

Depending on the type of insulation, it might be neces- sary to trim excess insulation prior to completing the hole. Once insulation is removed, continue drilling from inside until center drill bit of the saw just penetrates the outside wall.

TIP: Tape a bag to the wall directly below hole location to catch drill debris and dust or use a shop vacuum while drilling.

Complete 3” hole from outside of the home by locating center spiral drill bit penetration. Using the 3” hole saw finish drilling through the wall from the outside of the home.

Paper template

3” hole location

NOTE:

Attach the wall bracket to the wall with at least two screws capable of securing at least 60 lbs.

3.1

 

3.2

 

 

 

Option 1 installation: remove

Option 2 installation: remove full

small knockout for power

knockout for power cord and con-

cord only.

necting line.

 

 

 

 

 

 

Page 3 Page 5
Page 4
Image 4
Friedrich BR1224W3A installation instructions Hang wall mount bracket, Drill hole Option 1 or mount SimpleSill Option
Page 3 Page 5

BR1224W3A specifications

The Friedrich BR1224W3A is a highly efficient and advanced window air conditioning unit designed to provide optimal cooling and comfort in various environments. Offering a blend of cutting-edge technology and user-friendly features, this model stands out in today’s market for its capability to deliver powerful cooling while maintaining energy efficiency.

One of the primary features of the Friedrich BR1224W3A is its impressive cooling capacity. With a BTU rating of 12,000, it is well-suited for cooling spaces up to 550 square feet, making it ideal for medium-sized rooms such as bedrooms, living areas, or small offices. The unit is designed to cool quickly and efficiently, ensuring that users can enjoy a comfortable environment even during the hottest summer months.

This model incorporates advanced inverter technology, which allows it to adjust its cooling output according to the room’s temperature. This variable speed operation not only enhances comfort by providing a more consistent temperature but also helps to reduce energy consumption by minimizing the on-and-off cycle. As a result, the Friedrich BR1224W3A is ENERGY STAR certified, making it a sustainable choice for environmentally-conscious consumers.

Another notable feature is the unit's quiet operation. It is engineered with a sound-dampening design that minimizes noise, making it perfect for nighttime use or in quiet settings. With a low decibel level, users can enjoy a peaceful environment without the disruptive sounds often associated with standard window air conditioners.

The BR1224W3A also comes equipped with a programmable timer and multiple cooling modes, allowing users to tailor the cooling experience to their specific needs. The unit features an intuitive remote control, making it easy to adjust settings from across the room. Additionally, it includes a washable and reusable filter that helps maintain clean air quality while also reducing maintenance costs.

In terms of installation, the Friedrich BR1224W3A is designed for easy setup in standard window openings. Its compact design ensures a secure fit, while the side panels can be expanded to close gaps and improve energy efficiency. Overall, the Friedrich BR1224W3A combines exceptional performance, innovative technology, and user-friendly features, making it a top choice for those seeking reliable and efficient cooling solutions.
Top Page Image Contents