Now that you have determined where the modules will be placed, it is time to install the Breeze air conditioning system.

STEP 2 – Hang wall mount bracket

Using the paper template as a guide, locate two studs behind screw hole locations in the template. It is preferable to mount the hanging plate on studs. If two studs are not available, utilize anchors appropriate for the wall type with a combined weight capacity of at least 60 lbs. Standard wood screws and drywall anchors are provided.

If you are installing the system by drilling a 3” hole through the wall (Option 1), mark the location of the 3” hole centerline on the wall as well.

STEP 3 – Drill hole (Option 1) or mount SimpleSill™ (Option 2).

Always follow all local and national codes when in- stalling equipment. Obtain the help of trained, skilled worker where necessary.

Option 1: Drill hole Through-the-Wall Installation

Drill 3” hole through the exterior wall.

NOTE: This should only be done by qualified install- ers. Consult local and national codes before drilling any holes. Mark the hole location on the indoor wall using the template. (If locating unit above a window or door, make sure the hole is above structural header)

Using a stud finder, scan area around desired hole loca- tion for pipes, ducts, electrical conductors and struc- tural elements. Relocate indoor unit mounting location as necessary to avoid interference.

Using a 3” hole saw, drill hole through wall from inside toward outside. When hole saw cuts through inside wall, stop drilling. DO NOT drill the entire 3” hole from the inside to prevent insulation and exterior wall damage.

Depending on the type of insulation, it might be neces- sary to trim excess insulation prior to completing the hole. Once insulation is removed, continue drilling from inside until center drill bit of the saw just penetrates the outside wall.

TIP: Tape a bag to the wall directly below hole location to catch drill debris and dust or use a shop vacuum while drilling.

Complete 3” hole from outside of the home by locating center spiral drill bit penetration. Using the 3” hole saw finish drilling through the wall from the outside of the home.

NOTE: Wall mount bracket ships mounted to the back of the indoor unit with a single Phillips head screw. Remove screw to release the bracket for installation.

Paper template

3” hole location

NOTE:

Attach the wall bracket to the wall with at least two screws capable of securing at least 60 lbs.

3.1

 

3.2

 

 

 

Option 1 installation: remove

Option 2 installation: remove full

small knockout for power

knockout for power cord and con-

cord only.

necting line.

 

 

 

 

 

 

Page 3 Page 5
Page 4
Image 4
Friedrich BRO412W1A installation instructions Hang wall mount bracket, Drill hole Option 1 or mount SimpleSill Option
Page 3 Page 5

BRO412W1A specifications

The Friedrich BRO412W1A is a state-of-the-art portable air conditioning unit that combines powerful cooling capabilities with energy efficiency, making it a popular choice for residential and commercial use. Its sleek design is complemented by a variety of features and technologies that enhance user comfort and convenience.

One of the main features of the BRO412W1A is its cooling capacity. With a rating of up to 12,000 BTUs, this unit is capable of cooling spaces of up to 550 square feet. This makes it ideal for bedrooms, living rooms, offices, and other medium-sized areas. Additionally, its dehumidifying capability helps reduce humidity levels, creating a more comfortable environment, especially during hot and humid summer months.

The portable nature of the BRO412W1A offers significant advantages. It comes equipped with caster wheels, allowing users to move it from room to room with ease. This mobility means that users can have control over which areas they want to cool at any given time, providing flexibility that fixed units often lack.

In terms of energy efficiency, the BRO412W1A features an Energy Efficiency Ratio (EER) that ensures that it consumes minimal power while delivering optimal performance. This not only reduces electricity bills but also makes it an environmentally friendly choice. The unit is compliant with the latest energy efficiency standards, further ensuring that it operates with a low carbon footprint.

The self-evaporative technology in this air conditioner contributes to its efficiency by using the condensation produced during the cooling process. Rather than needing frequent manual drainage, the unit can recycle this condensation, leading to less hassle for the user.

For user convenience, the BRO412W1A includes a remote control, allowing you to adjust settings from anywhere in the room. The digital display and programmable timer facilitate easy operation, while multiple fan speeds and modes, including a cooling mode and fan-only mode, enable users to customize their comfort levels.

Overall, the Friedrich BRO412W1A stands out as an advanced portable air conditioning solution, offering robust features and technologies that prioritize both user comfort and efficiency. Whether for home or office use, it efficiently addresses the need for effective cooling in an increasingly warm climate.
Top Page Image Contents