Option 2: Window Installation Using Friedrich SimpleSill™

1.Be sure window sill is clean and free of dirt and debris. With the window raised, place bottom seal gasket (trimmed to window width) firmly against window sill

(adhesive side down). Expand the SimpleSill™ 1” greater than the width of the win- dow and install the securing pin. Place one end of the SimpleSill™ into the window opening so it is against the corner of the window frame and sill. Raise the other side of the SimpleSill™ 6-9 inches (depending on window width) above the window sill. Next, press the raised side down until the SimpleSill™ is lodged securely into position. The SimpleSill™ end gaskets will conform to the window track shape.

2.Reference Step 4.2 and pass the connecting line out the window and insert it into the connecting line form in the SimpleSill™.

3.Install top seal gasket to the bottom of the window so it will seal against the top of the SimpleSill.

4.Replace the pass through cover.

5.Insert securing pins.

6.Lower window frame against SimpleSill compressing gasket.

7.Depending on the type of window, install the appropriate security lock as recom- mended by manufacturer.

STEP 4 - Line set installation

1.

4.

5.

The Breeze connecting line set contains copper tubing that may kink if bent or formed incorrectly or repeatedly. To avoid damaging your Breeze air conditioning system follow the 3 rules below throughout installation:

1)DO NOT uncoil and recoil the connecting line set more than two times.

2)DO NOT bend tubing in a radius smaller than 6”

3)ALWAYS use the tube bending guide when making bends greater than 45°

Following these instructions is critical for proper installation and to avoid damage to the unit. Damage to the connecting line due to improper installation will not be covered by the warranty.

4.1 Option 1 (3” hole pass through)

Completely uncoil the line set as straight as possible. Starting with the quick connect end of the line set, pass the entire length through the 3” hole. (Before installation break small plastic knockout on side of indoor unit for power cord to pass through-see Step 3, Figure 3.1).

4.2 Option 2 (SimpleSillwindow installation)

STEP 5

Uncoil enough of the line set to completely pass through the SimpleSill. Pre bend the line set using the enclosed template to match the desired shape as it passes through the SimpleSill. Place remaining coiled line set outside the window for later connection to the outdoor unit. Break full plastic knockout for line set to pass through the side of the indoor unit-see Step 3, Figure 3.2.

STEP 5 - Hang the indoor module on the wall bracket.

Hang the module at the top first and rotate it down until the module is level with the wall. (You may need to make adjustments to the connecting line to get the indoor module to mount cleanly) The Breeze module is not designed to mount totally flush to the wall. A space of 1/8” to 3/8” may be present between the module and the wall.

The line set will sit in the recess of the back of the indoor unit when mounted.

Page 5
Image 5
Friedrich BRO412W1A installation instructions Line set installation, Hang the indoor module on the wall bracket

BRO412W1A specifications

The Friedrich BRO412W1A is a state-of-the-art portable air conditioning unit that combines powerful cooling capabilities with energy efficiency, making it a popular choice for residential and commercial use. Its sleek design is complemented by a variety of features and technologies that enhance user comfort and convenience.

One of the main features of the BRO412W1A is its cooling capacity. With a rating of up to 12,000 BTUs, this unit is capable of cooling spaces of up to 550 square feet. This makes it ideal for bedrooms, living rooms, offices, and other medium-sized areas. Additionally, its dehumidifying capability helps reduce humidity levels, creating a more comfortable environment, especially during hot and humid summer months.

The portable nature of the BRO412W1A offers significant advantages. It comes equipped with caster wheels, allowing users to move it from room to room with ease. This mobility means that users can have control over which areas they want to cool at any given time, providing flexibility that fixed units often lack.

In terms of energy efficiency, the BRO412W1A features an Energy Efficiency Ratio (EER) that ensures that it consumes minimal power while delivering optimal performance. This not only reduces electricity bills but also makes it an environmentally friendly choice. The unit is compliant with the latest energy efficiency standards, further ensuring that it operates with a low carbon footprint.

The self-evaporative technology in this air conditioner contributes to its efficiency by using the condensation produced during the cooling process. Rather than needing frequent manual drainage, the unit can recycle this condensation, leading to less hassle for the user.

For user convenience, the BRO412W1A includes a remote control, allowing you to adjust settings from anywhere in the room. The digital display and programmable timer facilitate easy operation, while multiple fan speeds and modes, including a cooling mode and fan-only mode, enable users to customize their comfort levels.

Overall, the Friedrich BRO412W1A stands out as an advanced portable air conditioning solution, offering robust features and technologies that prioritize both user comfort and efficiency. Whether for home or office use, it efficiently addresses the need for effective cooling in an increasingly warm climate.