Friedrich CP12 Installation Instructions, Tools You Will Need, Before You Begin, Important notes

Models: CP10 CP12

1 60
Download 60 pages 53.53 Kb
Page 10
Image 10

Installation Instructions

Read these instructions completely and carefully.

Tools You Will Need

Phillips-head screwdriver

Scissors or knife

Flat-blade screwdriver
Pencil
Ruler or tape measure
Level

 

Hammer

Before You Begin

NOTE TO INSTALLER: Leave these instructions with the air conditioner after installation is complete.

NOTE TO CONSUMER: Keep this Installation and Operation Manual for future use.

Important notes:

It is recommended that proper attire be worn during installation.
For personal safety, this air conditioner must be properly grounded.

It is important to have the wall outlet and circuit checked by a qualified electrician if there is any doubt as to whether a proper ground exists.

CAUTION:

Do not under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems ; consult a qualified electrician.

9

Page 10
Image 10
Friedrich CP12 Installation Instructions, Tools You Will Need, Before You Begin, Important notes, Flat-blade screwdriver