Friedrich CP12F10, CP10F10 manual Air HandlingParts, 10Room Air Conditioner, Disassembly

Disassembly

Air HandlingParts

1. AIR GUIDE AND BLOWER

1.	Remove the front grille.
2.	Remove the cabinet.
3.	Remove the control box.
4.	Remove the 3 screws which fasten the brace.
5.	Remove the brace.
6.	Remove the 2 screws which fasten the evaporator.
7.	Move the evaporator forward and pulling it upward
	slightly. (See Figure 4)
8.	Move the evaporator to the left carefully.	Figure 4

9.Pull out the hook of orifice by pushing the tabs and remove it. (See Figure 5)

10. Remove the clamp with a hand plier which secures the blower.

11. Remove the blower.

12. Remove the 4 screws which fasten the air guide from the barrier.

13. Move the air guide backward, pulling out from the base pan.

14. Re-install the components by referring to the removal procedure, above.

Figure 5

2. FAN AND SHROUD

1. Remove the cabinet.

2. Remove the brace.

3. Remove the 3 screws which fasten the condenser.

4. Move the condenser to the left carefully.

5. Remove the clamp which secures the fan.

6. Remove the fan and then pull out the shroud. (See Figure 6)

7. Re-install by referring to the removal procedure.

Figure 6

10Room Air Conditioner