Friedrich MW36C3G, MW30C3G, MR30C3G, MR36C3G En-7, To Stop Operation, Press the START/STOP button P

Models: MR36C3G MR30C3G MW30C3G MW36C3G

1 20
Download 20 pages 2.28 Kb
Page 8
Image 8
To Stop Operation

To Stop Operation

Press the START/STOP button (Fig. 6 P).

The OPERATION Indicator Lamp (red) (Fig. 3 5) will go out.

About AUTO CHANGEOVER Operation

AUTO: ● When AUTO CHANGEOVER operation first selected, the fan will operate at very low speed for about one minute, during which time the unit detects the room conditions and selects the proper operating mode.

If the difference between thermostat setting and actual room temperature is more than +4 °F Cooling or dry operation

If the difference between thermostat setting and actual room temperature is less than +4 °F Monitor operation

When the air conditioner has adjusted your room’s temperature to near the thermostat setting, it will begin monitor operation. In the monitor operation mode, the fan will operate at low speed. If the room temperature subsequently changes, the air conditioner will once again select the appropriate operation (Cooling) to adjust the temperature to the value set in the thermostat.

(The monitor operation range is +4 °F relative to the thermostat setting.)

If the mode automatically selected by the unit is not what you wish, select one of the mode operation (COOL, DRY, FAN).

About Mode Operation

Cooling: ● Use to cool your room.

Dry: ● Use for gently cooling while dehumidifying your room.

You cannot heat the room during Dry mode.

During Dry mode, the unit will operate at low speed; in order to adjust room humidity, the indoor unit’s fan may stop from time to time. Also, the fan may operate at very low speed when adjusting room humidity.

The fan speed cannot be changed manually when Dry mode has been selected.

Fan: ● Use to circulate the air throughout your room.

During Cooling/Dry mode:

Set the thermostat to a temperature setting that is lower than the current room tempera- ture. The Cooling and Dry modes will not operate if the thermostat is set higher than the actual room temperature (in Cooling mode, the fan alone will operate).

During Fan mode:

You can not use the unit to heat and cool your room.

En-7

9315345394_OM.indb 7

9/30/2010 2:44:23 PM

Page 8
Image 8
Friedrich MW36C3G, MW30C3G, MR30C3G, MR36C3G operation manual En-7, To Stop Operation, Press the START/STOP button P