Control Panel Operation

Dehumidifying and cooling operation

The operating range for cooling operation is 63°F - 88°F (or17°C-31°C) and the operating range for dehumidifying is 68°F-88°F (or 20°C - 31°C).

Power source

The AC socket must be firm and reliable.

Don’t connect the portable air conditioner to a multiple socket out- let which is also being used for other electrical appliances.

Insert the AC power plug securely into the AC socket before using the unit, when it beeps after two seconds, press ON/ OFF button, the unit begins to run.

LCDI power cord information

All Friedrich portable air conditioners are shipped from the factory with a Leakage Current Detection Interrupter (LCDI) equipped power cord. The LCDI device meets the UL and NEC requirements for cord connected air conditioners effective Au- gust 2004.

To test your power supply cord:

1.Plug power supply cord into a grounded 3 prong outlet.

2.Press RESET (See drawing below).

3.Press TEST (listen for click; Reset button trips and pops out).

4.Press and release RESET (listen for click; Reset button latches and remains on). The power supply cord is ready for operation.

NOTE: LCDI device is not intended to be used as a switch.

Once plugged in the unit will operate normally without the need to reset the LCDI device.

If the device fails to trip when tested or if the power supply cord is damaged it must be replaced with a new supply cord from the manufacturer. We recommend you contact our Technical Assistance Line at (800) 541-6645. To expedite service, please have your model and serial number available.

RESET

TEST

 

Test Button

 

Reset Button

WARNING: NEVER CUT OR REMOVE THE GROUNDING PRONG FROM PLUG. NEVER USE EXTENSION CORDS TO OPERATE AN AIR CONDITIONER.

Cooling operation

1.Press MODE button to choose the cooling mode, LCD window will show “cool”.

During the cooling operation, always place the air exhaust hose through an open window.

2.Repeatedly press TEMP+ or TEMP- button to set a proper room TEMP. between 63°F - 88°F.

3.Press FAN SPEED button to choose a proper fan speed: high, middle, low speed.

4.Press SWING button to adjust the air delivery direction, The LCD window will show “ ”.

NOTE:

In order to improve the cooling efficiency:

a)If your room is directly exposed to the sun, draw the cur- tains.

b)Do not place near other heat source.

Dehumidifying Operation

1.Keep the windows and the doors closed to aid in effectively dehumidifying the room.

2.Press MODE button to choose the dehumidifying mode, LCD window will show “DRY”, the fan speed cannot be ad- justed.

When used as dehumidifier only it is not necessary to install the exhaust hose.

Time Set Function

To set the time to start the machine, with the unit off (but power supplied), press TIMER button, the LCD window will show “ ”, continually press the TIMER button, set the preferred start time. The setting range is 1-12 hours.

To set the time to stop the machine, with the unit running, press

TIMER button, the LCD window will show “”, continually press the TIMER button ,set the preferred time to stop the ma- chine. The setting range is 1-12 hours

NOTE: During timer mode if the TIMER button is pressed again it will cancel the timer operation.

6

Page 6
Image 6
Friedrich P-09 operation manual Control Panel Operation

P-09 specifications

The Friedrich P-09 is a notable evolution in the field of air pistols, recognized for its advanced features and innovative technologies. Designed for sport shooting, training, and recreational use, the P-09 combines precision engineering with user-friendly characteristics that appeal to both beginners and experienced shooters.

One of the standout features of the Friedrich P-09 is its impressive blowback action. This design not only enhances the realism of shooting but also provides a more engaging experience by mimicking the feel of a real firearm. The pistol operates on compressed CO2, ensuring a consistent propulsion system that delivers reliable performance across numerous shots. The CO2 cartridge is cleverly housed within the grip, maintaining a clean aesthetic while allowing for quick and easy swaps during extended shooting sessions.

The P-09's semi-automatic mechanism allows for rapid follow-up shots, making it ideal for both target practice and competitive shooting scenarios. Its velocity can reach up to 130 meters per second, which not only ensures accuracy but also meets the standards for many shooting sports. The pistol is often equipped with adjustable hop-up systems, providing shooters with the ability to fine-tune their shots for improved precision.

Ergonomics play a significant role in the P-09’s design. The textured grip offers a secure hold, promoting comfort and control during use. Its lightweight build, combined with a balanced weight distribution, allows for extended shooting without undue fatigue. The pistol's controls are intuitively placed, ensuring quick access to the safety features and magazine release.

Aesthetically, the P-09 showcases a modern design with a matte finish that is not only visually appealing but also helps reduce glare during use. Many variants come with accessory rails, allowing shooters to customize their setup with lights or lasers, further enhancing versatility.

In conclusion, the Friedrich P-09 stands out due to its blend of innovative features, technological advancements, and ergonomic design. Ideal for anyone looking to hone their shooting skills or enjoy recreational shooting, the P-09 represents a prime example of modern air pistol engineering, making it a favorite among enthusiasts.