![Installation of Logs](/images/new-backgrounds/51015/5101549x1.webp)
| Screw | Burner | Screw |
| Hearth Panels |
| Grate |
|
|
| |
|
| Front of Unit | H100a |
|
|
| |
Fig. 48 | Hearth panel location. |
|
Installation of Logs
DV360/580 Series Direct Vent Gas Fireplace
Log Identification Chart
Logs | DV360 |
| DV580 |
| |||
Log Front Left | 20010673 |
| E9 |
Log Front Right | 20010672 |
| E10 |
Log Rear | 20010675 |
| E8 |
Log Top Left |
| E12 | |
Log Top Right | 20010676 |
| E13 |
Log Front Center |
| E11 | |
Log Top Center | 20010677 |
| |
Log Overlay | 20010674 |
| |
|
|
|
|
Remove front glass. (Refer to “Window Frame As- sembly Removal” Section, Fig. 47) Remove logs from packaging.
As with all plastics — these are not toys and should be kept away from children and infants.
DV360
NOTE: Refer to Figure 49 for bracket and bend loca- tions.
1.Place the log front right. Hold the log with the pointed end toward the left. Place on top of burner toward the right. Slide the log toward the front until it comes in contact with the bracket at the front of the burner housing behind the burner tube. (Fig. 49) Adjust the log until the pointed end on the left is aligned with the left edge of the bracket. (Fig. 50) NOTE: Gently push down on the right rear of the log so the pilot front shield cuts slightly into the log. This will help to ensure proper log position.
Left Edge | Pilot Front |
|
of Bracket | Shield | Rear Log |
|
| |
Stop |
| Bracket |
Bracket |
| Pilot |
|
| |
|
| Bracket |
|
| Bend |
Front Left
Bend
Front
Brackets
FP1653
Fig. 49 Burner brackets and bends.
Figure 50 | Log Front Right |
|
LG477
Front Brackets
20010667 | 25 |