Vermont Casting DV580, DV360 manual DV360/580 Series Direct Vent Gas Fireplace, Refer to Figure

Models: DV580, DV360 DV360

1 56
Download 56 pages 36.98 Kb
Page 27
Image 27
DV580
Log
Rear

6. Place the log top cen-

DV360/580 Series Direct Vent Gas Fireplace

Figure 54

ter. Hold the log with

the pointed end toward the back. Match the two holes on the bottom of the log with the two pins

on the top of the log front right. (Refer to Figure 53 for pin loca- tions) Set the log and lay it into the rear log. (Fig. 54)

7.

Place the log top right. Hold the

 

log with pointed end to the left.

 

Match the two holes on the bot-

 

tom of the log with the two pins

 

on the rear log and set the fork

 

on the log over the right front

 

log. (Fig. 54)

8.

Place the lava rock on the

 

hearth refractory in the front

Log Top Center

Log Top Right

Log

Front

Right

LG464

as desired. (Fig. 54)

Log Front Left

Lava Rock

 

DV580

Refer to Figure 51.

1. Place rear log (E8) on rear

bracket (ensure the notch on

the left end is centered on

the left side of rear bracket),

so it will not move from side

to side and is firmly posi-

Log Top Left

(E12)Log Rear

(E8)

Log Top Right (E13)

 

tioned on the bracket. Be

 

sure log is as far forward as

 

possible on bracket. (Fig. 55)

2.

Place front left log (E9) on

 

top of burner, left side. Align

 

log’s bottom holes with left

 

bracket log locator studs.

3.

Place front right log (E10)

 

on top of burner, right side.

 

Align log’s bottom holes

 

with right bracket log locator

 

studs. (Fig. 50)

4.

Place top left log (E12). Use

Log Front Left (E9)

Log Front Right (E10)

log’s bottom hole to locate

it onto rear log left (E8) and

just rest bottom cut out log

onto the grate assembly.

Burner Lava Rock and

Log Front

 

1/3 of the bag of Embers

 

Center (E11)

LG395

 

 

 

Fig. 55 DV580 log, burner lava rock and ember placement.

5.Place top right log (E13).

Use log’s bottom hole to locate it onto rear log right (E8) and the bottom of top right log rest onto front right log (E10).

6.Place front center log (E11). Position the log notch against the center grate assembly and the bottom of front center log rest onto front right log (E10).

7. Place large lava rock around the front grate.

Top logs must be placed properly onto notches.

20010667

27

Page 27
Image 27
Vermont Casting DV580, DV360 manual DV360/580 Series Direct Vent Gas Fireplace, Refer to Figure, 20010667