Installed WASHer dimensions
50.8” (129cm) to clear open door
29.75” (75.5cm)*
to front of closed door
water supply connection on rear of unit1
freestand washer on floor
floor line
washer mounted on optional pedestal
floor line
27.0”
(68.5cm)
| drain hose |
|
|
| on rear |
|
|
power cord | of unit3 |
|
|
|
|
| |
on rear of unit2 |
| 51.25” | |
|
| (130cm) | |
|
|
|
|
|
|
|
|
| 36.0” |
| |
| (91.5cm) |
| |
|
|
|
|
|
|
|
|
|
|
|
|
*To obtain these minimal depth dimensions, dryer must be vented straight back. Using a
2.25 in. (5.7 cm) to installation depth.
1Hot and cold inlet hose length approximately 43 inches (109cm) 2Power supply cord length approximately 60 inches (152.5cm).
3Drain hose length approximately 52 inches (132cm).
50.8” (129cm)
to clear open door
29.75” (75.5cm)*
to front of closed door
71.5”
(182cm)
water supply connection on rear of unit1
27.0”
(68.5cm)
electrical supply on rear of unit
gas supply pipe on rear of gas unit
37”
(94cm)
power cord
centerline height for rear vent
drain hose on rear of unit3
on rear of unit2
39”
(99cm)
*To obtain these minimal depth dimensions, dryer must be vented straight back. Using a
| 1Hot and cold inlet hose length approximately 43 inches (109cm) |
| 2Power supply cord length approximately 60 inches (152.5cm). |
6 | 3Drain hose length approximately 52 inches (132cm). |
|
