Frigidaire 316135917 Oven Control Style, Setting the Clock Minute Timer, To Set the Clock Style

Oven Control Style 2 -	Control Style 2
Setting the Clock and
Minute Timer

For a silent control panel (Control Style 2 Only):

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. Push and hold STOP TIME for 7 seconds. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pushed. To return the sound, push and hold STOP TIME again for 7 seconds until 1 beep is heard. Note: The control will return to the audible mode after a power outage.

To Set the Clock Style 2

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1.Push .

2.Within 5 seconds, push and hold or until the correct time of day appears in the display.

Note: The clock cannot be changed during any timed bake or self-clean cycle.

To Set the Minute Timer Clock Style 2

1.Push .

2.Push to increase the time in one minute increments. Push and

hold to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If you push first, the timer will advance to 11 hours and 59 minutes.

3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.

4.When the set time has run out, the timer will beep 3 times. It will then

continue to beep 3 times every 60 seconds until is pushed.

Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other mode, the minute timer will be shown in the display. To view other functions, push the function pad for that mode.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, push and hold or to increase or decrease the time.

To Cancel the Minute Timer before the set time has run out:

Push .

8