Oven Control Style 1 or 2 - Customizing Your Oven Performance
Note: The adjustments made will not change the
Control Style 1
Control Style 2
The temperature in the oven has been set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed.
To Adjust Oven Temperature - Control Style 1
1.With the dial set to OFF, press and hold
for 30 seconds until a single beep is heard.
2.Within 5 seconds, turn the Temperature Control Knob clockwise to either the High (HI) or Low (LO) Broil setting. Select High Broil (HI) to increase the temperature or Low Broil (LO) to decrease the temperature.
3.The temperature can be adjusted up or down 35°F, in 5°F steps, by pressing START. Adjust until the desired amount of offset is indicated by the indicator lights as follows:
A flashing "OVEN" indicator light indicates a positive offset, while a flashing "LOCK" indicator light indicates a negative offset. The lights will flash once for each 5°F of offset. If no light is flashing, the oven control has the original factory calibration, and the offset is 0°F. Example: If the OVEN indicator light is flashing three times and then pauses, the offset is +15°F.
4.When you have made the desired adjustment, turn the Temperature Control Knob to OFF.
To Adjust Oven Temperature - Control Style 2
1.With the dial set to OFF, press and hold
for 30 seconds until a single beep is heard.
2.Within 5 seconds, turn the Temperature Control Knob clockwise to either the High Broil (HI) or Low Broil (LO) setting.
3.The display now indicates the amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read "00."
4.The temperature can now be adjusted up or down 35°F, in 5°F steps, by
pushing and holding
or 
. Adjust until the desired amount of offset appears in the display.
5.When you have made the desired adjustment, turn the Temperature Control Knob to OFF.
17
